Modern Sporter / Cmmg 22 range day.

robab

CGN frequent flyer
Rating - 100%
49   0   0
Location
NL
This is a more comprehensive review of my Modern Sporter build and range results. Had it for around 3 months now. Tried some different types of ammo. See below for some results. The goal of this build was a rifle for all seasons here in NL. So I bought a Cmmg 22 conversion kit to use as a small game/plinker in addition to a range/ coyote / woods walk gun.

To my dismay the Cmmg 22 conversion didn’t fit. But not to worry. Atrs to the rescue. They modified my cmmg bolt to fit my Modern Sporter and it still fits my AR. Tested today and ran flawless with cheapie Golden bullets. It ran 150-200 rounds perfect. The only hiccup was one Double feed. But I’m seeing that as a mag issue.

Regards to 5.56 it is 100% reliable. I have around 3-400 through it now. Started off on a bad foot as the initial buffer tube seemed to be out of spec and too short. The bcg couldn’t retract far enough. Replaced with a Stag and resolved that.

Parts list is as follows: Norinco 20” barrel, bcg, buffer/tube is Stag, LPK is BCM , stock/grip are Bcm, brake is Faxon, rail is Troy vtac, optic is Vortex Crossfire 1-4, also I have a stubby forward grip , Olight light and mount I keep in the bag for when you never know.

Here is the setup I keep in my case, it’s a self contained system i think.
D645A102-AE33-470F-A3BB-642A61E54DD9.jpg

This is the modified cmmg bolt next to a Stag bcg.
750B3BBA-7747-4252-9402-8B583177B87C.jpg

100 yard groups , wind was at my back around 40kph. Pleased with the Frontier ammo.
1BBA100B-CE3A-43C4-B7C3-A7EDC8D32FAF.jpg

Some 200 yard groups with Norinco surplus. Keep in mind I’m using a 4 power optic
C2986FD8-D436-47BF-B515-50237C4214F6.jpg

Finally some testing with the Cmmg 22 kit at 50 yards. I’d like it a bit better. So I’ll fool with it some more. But it’s definitely capable for small game at 20-40 yards.
C2DA16A1-966B-463A-B4DC-22C574135656.jpg
 

Attachments

  • D645A102-AE33-470F-A3BB-642A61E54DD9.jpg
    D645A102-AE33-470F-A3BB-642A61E54DD9.jpg
    86.2 KB · Views: 660
  • 750B3BBA-7747-4252-9402-8B583177B87C.jpg
    750B3BBA-7747-4252-9402-8B583177B87C.jpg
    113.2 KB · Views: 654
  • 1BBA100B-CE3A-43C4-B7C3-A7EDC8D32FAF.jpg
    1BBA100B-CE3A-43C4-B7C3-A7EDC8D32FAF.jpg
    110 KB · Views: 656
  • C2986FD8-D436-47BF-B515-50237C4214F6.jpg
    C2986FD8-D436-47BF-B515-50237C4214F6.jpg
    94.2 KB · Views: 652
  • C2DA16A1-966B-463A-B4DC-22C574135656.jpg
    C2DA16A1-966B-463A-B4DC-22C574135656.jpg
    116.6 KB · Views: 650
Thanks for the post, planning something similar for my modern sporter when it arrives. I guess I'll be sending the cmmg kit to atrs as well. Thanks for putting in the leg work!
 
Does the CMMG bolt still function fine in an AR15 upper in addition to your modern sporter?

What did ATRS charge for the modification?

I've been looking to do something like this since I ordered my modern sporter but don't have access to the tools i would need to do this mod; so i have been thinking about sending it somewhere to get it done for me.
 
Does the CMMG bolt still function fine in an AR15 upper in addition to your modern sporter?

What did ATRS charge for the modification?

I've been looking to do something like this since I ordered my modern sporter but don't have access to the tools i would need to do this mod; so i have been thinking about sending it somewhere to get it done for me.

Still works in an Ar. However haven’t function tested yet. They didn’t change the overall length. Just moved the spring forward slightly with a modified block they installed $150. Ran flawless in the Sporter. Lot of fun.
 
Does the CMMG bolt still function fine in an AR15 upper in addition to your modern sporter?

What did ATRS charge for the modification?

I've been looking to do something like this since I ordered my modern sporter but don't have access to the tools i would need to do this mod; so i have been thinking about sending it somewhere to get it done for me.


Can confirm the modified cmmg kit works flawless in my AR also. Had it out on 3 occasions now. Only minor issue appears to be some wear around the feed lips of the plastic mags.
 
Back
Top Bottom