Moly paste
- Thread starter mephiskapheles6
- Start date
No, too much grease and not enough moly and it will migrate inside your rifle and end up outside or in front of the piston which is bad.. I bought some Loctite moly 65 paste from an industrial distributor some people order Honda moly paste.A person can get this, I would have but a few years ago when I was looking for some they were out of stock. http://www.airgunsource.com/air-venturi-moly-metal-to-metal-paste/dp/860 (good outfit to deal with)
It takes very little to work properly, you don't want it migrating all over the place and it's messy.
It takes very little to work properly, you don't want it migrating all over the place and it's messy.
idontknowjack
CGN Regular
- Location
- SW Ontario
If you shop online, this is what you want...
ht tp://www.amazon.ca/Genuine-Honda-08734-0001-Moly-Grease/dp/B0083BWUYW
ht tp://www.amazon.ca/Genuine-Honda-08734-0001-Moly-Grease/dp/B0083BWUYW
Hey, thats a good deal and you can get it gift wrapped.
- Location
- Southern Vancouver Island
Lucas synthetic wheel bearing lube works perfect for this application. A thin coat applied to the piston bore of the rifle will serve for hundreds of shots. Funny enough, the lube that came with my V-Mach spring kit for my Diana 52 was the same green color and had the same feel as the Lucas stuff. Works beauty.
Moly paste is the way to go. It's available at Specialty Shooting Sports http://www.specialtyshootingsportso...tom-shop/innova-airsport/moly-paste-2-oz.html
If you can't get moly, try Krytox 205 or Ultimox 226 (European version of Krytox).
If you can't get moly, try Krytox 205 or Ultimox 226 (European version of Krytox).
