MORISSON LEVER 22 LR 18" TIMBERWOLF Laminate Furniture Nickel Finish Non-Restricted

North_Sylva

North_Sylva

CGN Ultra frequent flyer
Business Member
Rating - 100%
9   0   0
SKU#: ML2318-22.

Comes with two 10-round magazines. Accepts Derya TM22 25rd mags.

Stocking Dealers:
- Tenda
- Dante
- Alberta Hardware
- East Side Sport
- Londero Sports
- Gremm Sports

ML2318-22.jpg
DSC_2718.jpg
DSC_2719.jpg
DSC_2725.jpg
DSC_2721.jpg
 
Sure a nice looking lever 22 rifle.

Is it good, or more Turkish crap?:unsure:

And yes I like some Turkish made firearms!.....:)

https://pdent.ca/product/morisson-l...2-barrel-nickel-receiver-laminate-stock/#more

https://www.gotenda.com/product/morisson-lever-action-22-lr-18″-timberwolf-laminate-nickel-finish/

One model appears to use a removable magazine, GoTenda link.

Yet a similar model from P&D Enterprises shows a side-gate 22 LR? Is there such a thing as a 22 LR side-gate loading lever rifle?....:)

Are there actually two different Morrison Nickel/Laminate lever 22 LR models?:unsure:
 
Last edited:
Thunderhog said:
Sure a nice looking lever 22 rifle.

Is it good, or more Turkish crap?:unsure:

And yes I like some Turkish made firearms!.....:)

https://pdent.ca/product/morisson-l...2-barrel-nickel-receiver-laminate-stock/#more

https://www.gotenda.com/product/morisson-lever-action-22-lr-18″-timberwolf-laminate-nickel-finish/

One model appears to use a removable magazine, GoTenda link.

Yet a similar model from P&D Enterprises shows a side-gate 22 LR? Is there such a thing as a 22 LR side-gate loading lever rifle?....:)

Are there actually two different Morrison Nickel/Laminate lever 22 LR models?:unsure:
Click to expand...

P&D used the wrong photo.
 
Mark-II said:
Let us know whether it's aluminum or pot metal with a skin on it (like Henry's are)

I'm not going to assume that anyone is making a cheap .22 from steel these days
Click to expand...
No firearm manufacturers makes an inexpensive lever 22 LR from steel these days. It will be cast metal of some kind.:unsure:

Henry makes a very nice rimfire rifle, Zamac receivers I believe. Zamac is a combination of zinc, aluminum, magnesium, and copper. I have no problem with Henry receivers at all......:):giggle:

Yes I know Browning makes a steel receiver lever BL 22 rifle, however they are quite expensive. And I have owned a Browning BL 22, no better than a Henry or Savage Revel..........:(
 
I have a BL-22, Henry Pump and Savage Revel. The BL is head and shoulders above the other two.

Pump on the Henry rattles like it's going to fall off some day, and the lever throw on the Savage is ridiculous. Cycling on both can be inconsistent.

I like all 3, but if I were to keep only one it would be the Browning.

Zamac/Mazac - all of that stuff is pot metal to me. It may work just fine today, but it will not match steel for long term durability.
 
Update: this arrived yesterday. First impression is that it’s well built, fit and finish is really nice. On par with any of the Derya versions of this that I’ve handled, maybe even a bit better. Hard to tell exactly what the receiver material is with this finish, but it’s non-magnetic and feels solid. The bolt was nicely oiled out of the box.

Put a few dozen rounds through it today. Action is smooth and mags drop free. Haven’t put it on paper yet but it was reasonably accurate shooting steel targets at 25 yards with the irons. I can’t recall if the Derya version has this, but the action locks open on an empty mag.

Will update again after I get to 1000 rounds through it. So far, would I buy it again? Absolutely!
 
DustyPotatoes said:
Update: this arrived yesterday. First impression is that it’s well built, fit and finish is really nice. On par with any of the Derya versions of this that I’ve handled, maybe even a bit better. Hard to tell exactly what the receiver material is with this finish, but it’s non-magnetic and feels solid. The bolt was nicely oiled out of the box.

Put a few dozen rounds through it today. Action is smooth and mags drop free. Haven’t put it on paper yet but it was reasonably accurate shooting steel targets at 25 yards with the irons. I can’t recall if the Derya version has this, but the action locks open on an empty mag.

Will update again after I get to 1000 rounds through it. So far, would I buy it again? Absolutely!
Click to expand...
Yeah, they all have last shot hold open...sort of.
Just the mag follower sticks up and blocks bolt travel.
 
You must log in or register to reply here.
Back
Top Bottom