Mosin sniper issue

[catapult]

Hi,

I have some problem with my Mosin sniper. When I open the bolt and grab the round, put it in the chamber and close the bolt everything work smooth but only if I have only 1 round in the mag. But if I put 2 or more rounds in the mag, I cannot close the bolt after I have put the round in the chamber. What is going on ? Am I clear with my description ?

 

[desporterizer]

Take the action out of the stock & make sure the screw hold the interrupter/ejector is tight. Also, when you put a rnd in the mag make sure you push it down enough to sit under the interrupter.

 

[kaskirov]

Rim lock might the the problem. Make sure that you place the rim of the round (non-pointy end) in front of the round below it. The rims can catch on each other and prevent the round from entering the chamber. The mosin has some system in the magazine that holds the rounds away from the top round to prevent this, but sometimes it doesn't work properly.

 

[BadAsMo]

The interrupter can be installed backwards. You might try reversing it - front to back... Just a thought.