Maple Ridge Armourer
CGN frequent flyer
Please contact us via email or telephone during operating hours. As far as I know, all paid orders have shipped.
MRA Renegade Rifles, Parts, and Kits now available
- Thread starter Maple Ridge Armourer
- Start date
Please contact us via email or telephone during operating hours. As far as I know, all paid orders have shipped.
Maple Ridge Armourer
CGN frequent flyer
We should have an A2 adaptor ready early November followed by the upgrade bolt handle.
Please email us after Novebmer 1st for the new gas port block. We will ship you one as per our rock-solid lifetime warranty.
- Location
- Vernon, BC
Thank you very much for the follow up!!
I will email you after November 1 regarding the Gas Port Block
Very much looking forward to the above!!
Regards
AbH
jiffx2781
CGN Ultra frequent flyer
- Location
- Onterrible
Did you try MSC Industrial? If the store doesn't have stock the website is showing 10 packs of 1/4-28 x 1/2" nylon tipped in stock.
Or you could go all in for a 100 pack and make a fortune selling the extra 99 individually on the EE
Last edited:
Arrived today and was really easy to put together. Plan to take her out tomorrow to see how she shoots.
Fit and finish are great! Very happy with the quality of the product. With the Maxim Defense CCS stock, 10.5 inch barrel, and Warden it comes in at 27 inches... if it hasnt been mentioned already, the receiver is 7 3/4 inches long (excluding the barrel nut threads).
Notes:
- Using Radian takedown pins I did notice some play between the upper and lower receivers, but this was resolved by using the supplied takedown pins.
- if you are using a Geissele Handguard you are going to need to grind down the anti-rotation tabs
- I really like how tight the magwell is while still accepting various metal and plastic mags without issue
Last edited:
Arrived today and was really easy to put together. Plan to take her out tomorrow to see how she shoots.
Fit and finish are great! Very happy with the quality of the product. With the Maxim Defense CCS stock, 10.5 inch barrel, and Warden it comes in at 27 inches... if it hasnt been mentioned already, the receiver is 7 3/4 inches long (excluding the barrel nut threads).
Notes:
- Using Radian takedown pins I did notice some play between the upper and lower receivers, but this was resolved by using the supplied takedown pins.
- if you are using a Geissele Handguard you are going to need to grind down the anti-rotation tabs
- I really like how tight the magwell is while still accepting various metal and plastic mags without issue
That looks badass. What is the OAL without the Warden blast device? Does this count towards your 27 inch OAL?
Hi, which non collapsible stock did you try to fit that didn't work?
Rgrabowski
Regular
- Location
- B.C
Could you please tell me the length of the handguard?
Arrived today and was really easy to put together. Plan to take her out tomorrow to see how she shoots.
Fit and finish are great! Very happy with the quality of the product. With the Maxim Defense CCS stock, 10.5 inch barrel, and Warden it comes in at 27 inches... if it hasnt been mentioned already, the receiver is 7 3/4 inches long (excluding the barrel nut threads).
Notes:
- Using Radian takedown pins I did notice some play between the upper and lower receivers, but this was resolved by using the supplied takedown pins.
- if you are using a Geissele Handguard you are going to need to grind down the anti-rotation tabs
- I really like how tight the magwell is while still accepting various metal and plastic mags without issue
the muzzle device contributes of OAL. I was sitting at 24.5 without it.
mk8 9.5" ... worked out perfectly
Hit the range earlier. Fun to shoot, but extraction takes some effort. Going to really clean up the chamber tonight and hope it is a little easier tomorrow
Rgrabowski
Regular
- Location
- B.C
Thanks, do you think a 10 inch handguard would have enough clearance for the warden?
Do muzzle devices add to get to the legal OAL?
Do muzzle devices add to get to the legal OAL?
the muzzle device contributes of OAL. I was sitting at 24.5 without it.
mk8 9.5" ... worked out perfectly
Hit the range earlier. Fun to shoot, but extraction takes some effort. Going to really clean up the chamber tonight and hope it is a little easier tomorrow
Haywire1
Member
Yes the oal is overall length in the shortest fireable state, muzzle devices count for that, they dont count for barrel length on semi autos
An ar bolt unlocks when fired. So with this straight pull design, is the unlocking mechanism going to withstand the increased chamber pressure or just let the bolt loose.
In an AR this is not a concern because the unlocking and rearward movement of the bolt upon firing is expected and buffered.
Forgive me for sounding stupid here, but there has been failure of other rifle straight pull designs resulting in serious injury when the bolt shoots rearward
I guess my question is, what prevents the camming action of the bolt when fired that would allow it to unlock and how strong is it?
Last edited:
Philosoraptor
Member
- Location
- BC
I think you can rest easy. In battery, the bolt is resting on the 7 locking lugs of the barrel extension. It will not unlock until you manually pull the charging handle backwards, camming open (via the cam pin, same as any modern sporting rifle) the rotating bolt to release from the locking lugs and allowing rearward travel of the bolt carrier. For a semi-auto MSR, it should be the same, the locking lugs will retain the bolt in battery upon being fired until the gas system cams open the bolt via direct impingement into the gas key forcing the bolt carrier rearward (as you would with the Renegade but with your hand). Granted there may be some extra pressure on the locking lugs as the carrier will remain in battery for the bullets entire cycle/burn through the barrel, but I don't think it would warrant anything excessive.
Now I think what you're alluding to is a failure of all the locking lugs, thereby allowing the bolt to move rearward unintentionally upon being fired? I don't think it should be an issue or danger, In the unlikely event that all 7 of those lugs break at once, you still have a carrier that is almost similar in weight to a full mass M16 BCG, which also has a buffer spring and weight behind it. Not to mention it would have to overcome those forces and punch through your aluminum buffer tube end plate and stock. Worst thing I see happening is the charging handle slaps your hand if you're holding the rifle improperly.
Just my opinion, worth what you paid for it, I am no engineer by any means
Dmitri
CGN Ultra frequent flyer
Finally got my 12.5" barrel from BA in 6.5 grendel, this beast in now complete. Well almost, a Vortex Venom red dot is on the way to be installed on the 45 degree mount. Im also thinking of giving it some nice colorful battle worn finish with cerakote. Just need to decide on the colors..maybe bronze under black or perhaps orange under gray would look nice too.. i will keep you guys posted.
Im also thinking of giving it some nice colorful battle worn finish with cerakote. Just need to decide on the colors..maybe bronze under black or perhaps orange under gray would look nice too.. i will keep you guys posted.
This is a .277 without issues.
This is a 7.62x39 without issues.
I have another .30 caliber also without issues.
Dmitri - very nice - BA = Ballistic advantage? Did you order direct from them or is there a source here in Canada?
Happy with the reliability and accuracy?
....
Never mind - I found a couple of Canadian dealers who carry them. I'm planning on a very similar build!
Happy with the reliability and accuracy?
....
Never mind - I found a couple of Canadian dealers who carry them. I'm planning on a very similar build!
Last edited:
