MRA Renegades back in stock!

[CanuckShooter]

So it has a 223 Wylde chamber, but you don't recommend firing brass cased 5.56 NATO in it?

 

[VictoryRidgeCS]

So it has a 223 Wylde chamber, but you don't recommend firing brass cased 5.56 NATO in it?

Commercial brass cased 5.56 works just fine. Military surplus stuff not so much unfortunately. Chamber lapping with a proper lapping tool can remedy this but can also affect accuracy if not done carefully.

 

[CanuckShooter]

So as long as we stick to XM193, XM855 made by Federal, PMC, or S&B, etc we're good?

 

[VictoryRidgeCS]

So as long as we stick to XM193, XM855 made by Federal, PMC, or S&B, etc we're good?

Yes exactly. Our customers have reported that the PMC M855 in particular works very well in our rifles.

 

[bWONGER]

Yes exactly. Our customers have reported that the PMC M855 in particular works very well in our rifles.

I found Winchester 5.56 ran well too

 

[VictoryRidgeCS]

Freshly minted 16" Renegade rifle. We have these in stock now.

 

[brownbear53]

Hi CanuckShooter, that's a great question. I asked the boss that same question a couple years ago when I first found out about this rifle.

LOL. Ask the boss on how you missed it?

Isn't Maple Ridge Armory and Victory Ridge owned by the same person.
I understand you want to be relatable to your customers but don't just make up lies about it.

 

[Sigh]

Freshly minted 16" Renegade rifle. We have these in stock now.

View attachment 982612

Any word on when these would ship out? Estimated end of week on my order! Heard it was a parts delay despite website saying in stock.

Stoked to get some rounds down range!

 

[Victory Ridge Sportsman]

LOL. Ask the boss on how you missed it?

Isn't Maple Ridge Armory and Victory Ridge owned by the same person.
I understand you want to be relatable to your customers but don't just make up lies about it.

Perhaps you misunderstand. In what way do you think we are lying?

 

[zxnith]

why do the newer models come with a crappy stock and grip? What happened to the magpul furniture?
are there more cerakote models comming? Like the one featured on Canadian caliber

 

[gallen270]

You should add a 9mm glock magazine receiver size and complete guns to your line up.

 

[bWONGER]

You should add a 9mm glock magazine receiver size and complete guns to your line up.

A renegade in 9mm would be amazing

 

[VictoryRidgeCS]

LOL. Ask the boss on how you missed it?

Isn't Maple Ridge Armory and Victory Ridge owned by the same person.
I understand you want to be relatable to your customers but don't just make up lies about it.

Before you start throwing around accusations of lying, please understand that there is more than one person who works here and replies to this forum. I did not work here when the rifle was designed and did actually have to ask about certain design considerations.

So in fact no lying here.

 

[VictoryRidgeCS]

Any word on when these would ship out? Estimated end of week on my order! Heard it was a parts delay despite website saying in stock.

Stoked to get some rounds down range!

We are shipping as fast as we can. As you may understand we are being deluged with orders at the moment. Trying to keep up with the high demand.

 

[VictoryRidgeCS]

why do the newer models come with a crappy stock and grip? What happened to the magpul furniture?
are there more cerakote models comming? Like the one featured on Canadian caliber

Changes to furniture are pragmatic due to very intermittent and unreliable supplies of Magpul. The tariffs have played a huge role in this.

Cerakote jobs can be special ordered at a reasonable price, but takes some time. We are trying to reserve some new production rifles to Cerakote immediately and have available off-the-shelf as Cerakote rifles. Stay tuned.

 

[VictoryRidgeCS]

Would a LAW folding buffer tube adapter allow the Renegade to work when not folded? Would length with the folder folded have to be less then 270mm, since you might be able to get off a single shot? The latter might negate the utility of a LAW folder, unless you wanted a long barrel but wanted to reduce the overall length for transport purposes.

We had a customer send us one, and it almost worked. Then it turns out it was an airsoft copy of the folding stock adapter and that was the deal breaker. Parts were not to spec.

A real Law folder should work. As for legality, not sure, since it really shouldn't be fired with the stock folded... we are not lawyers here.

 

[VictoryRidgeCS]

Any idea when the next shipment of 12.5” renegades will be in?

We are expecting more in about 2 weeks, maybe less if fate favours us for a change.

 

[blinky989]

We are expecting more in about 2 weeks, maybe less if fate favours us for a change.

Website is saying the 12.5” are back in stock - but that’s for the inventory you’re expecting in 2 weeks?

 

[VictoryRidgeCS]

Website is saying the 12.5” are back in stock - but that’s for the inventory you’re expecting in 2 weeks?

Yes, it's just some parts that are coming and we will have complete rifles in 2 weeks to ship.

 

[gallen270]

Yes, it's just some parts that are coming and we will have complete rifles in 2 weeks to ship.

Breeze right over my comment about a 9mm sized rifle ehh, throw us a bone, drop a hint, we’re all good friends here.