MRA V1-B Receiver Set PRESALE!

[Sqr]

Where the heck are these things anyway?

At the range...........first day out.

 

[Esvagt]

At the range...........first day out.

Looks great, can't wait to get my hands on mine.

 

[austin99023]

Anyone know the legal details about this? Could one take apart a now prohibited AR-15 and put the parts on this?
Wouldn't it be impossible to re-register the lower as just a lower?

 

[Sqr]

Anyone know the legal details about this? Could one take apart a now prohibited AR-15 and put the parts on this?
Wouldn't it be impossible to re-register the lower as just a lower?

There is no lower per say on the reneged as the upper is the serialized firearm and the "lower metal" only hold the FCG and nothing else.

 

[Philosoraptor]

Edit - nevermind, saw your cross post in the MRA thread. Nice looking x39 build!

For SFRC, is your SOP for any preorders to send an email requesting completion of payment?

 

[hbean]

Anyone know the legal details about this? Could one take apart a now prohibited AR-15 and put the parts on this?
Wouldn't it be impossible to re-register the lower as just a lower?

it is not a semi auto, there is no need to register anything, unless you decide to build a rifle that is less than 26 inches overall

 

[lynx0069]

Anyone know the legal details about this? Could one take apart a now prohibited AR-15 and put the parts on this?
Wouldn't it be impossible to re-register the lower as just a lower?

It has been designed for the purpose of using your ar15 parts, repurposing them into a non restricted straight pull bolt gun....as long as you meet the 26" minimum length...youre golden

 

[lynx0069]

got mine today...a day late, because UPS is messed up.......

hope i posted that pic correct...lol

 

[MACH]

got mine today...a day late, because UPS is messed up.......

hope i posted that pic correct...lol

Wait so your kit came with the pivot/retaining pins+detents/springs?

 

[Sqr]

Wait so your kit came with the pivot/retaining pins+detents/springs?

Yes.....only one short detent spring.

 

[MACH]

Damn... I bought a whole LPK... can always use the spare parts later I guess. Thanks for the confirmation!

 

[lynx0069]

Wait so your kit came with the pivot/retaining pins+detents/springs?

no detents....those are the dowels for the charging handle....and only one pin spring, think its the pivot pin spring

 

[Sqr]

no detents....those are the dowels for the charging handle....and only one pin spring, think its the pivot pin spring

Oops you are correct because I purchased stainless steel ones to slow the wearing down.

 

[Helka]

Just received shipping notification!!!!!!!! cant wait to put my Frankenstein together from left over parts I have. She wont be pretty that's for sure.

 

[Helka]

And here is it put together from left over parts. Range report in a few days if I can make it out.

 

[Sqr]

 

[Maple Ridge Armourer]

PLS Delete

 

[Helka]

So I took my Frankenstein gun out. I don’t know if I rushed putting it all together but was having a lot of fail to fire. Probably 3 out of 5 shots each time. And trying to pull the carrier back after the misfire has left my hand black and blue, I would hear a dreaded “click” rack it and try again. Even force closing the bolt still led to misfires. I’m going to take it apart and give it a good cleaning again. Maybe try my S&W bolt vs my new Brownells I used for it. But out of my 16” barrel I got ok grouping at 100 yards.



That’s a 3” circle

 

[Maple Ridge Armourer]

So I took my Frankenstein gun out. I don’t know if I rushed putting it all together but was having a lot of fail to fire. Probably 3 out of 5 shots each time. And trying to pull the carrier back after the misfire has left my hand black and blue, I would hear a dreaded “click” rack it and try again. Even force closing the bolt still led to misfires. I’m going to take it apart and give it a good cleaning again. Maybe try my S&W bolt vs my new Brownells I used for it. But out of my 16” barrel I got ok grouping at 100 yards.

View attachment 424785

That’s a 3” circle

That doesn't sound or look right.

Shoot us an email or call the shop and we can help you resolve this.

Ps. Nice looking build!

 

[Helka]

That doesn't sound or look right.

Shoot us an email or call the shop and we can help you resolve this.

Ps. Nice looking build!

I will thank you