Muzzle brake???

Jamie

Jamie

"REDBEARD"<br>Super Moderator
Moderating Team
Rating - 100%
123   0   0
Location
Earth
any of you guy's ever use the Badger FTE Removable Muzzle break?

or anyone know if one can buy a AI brake,I want a clamp on style,so I can take it off if need be,

I was shooting today and I was having a hard time spotting my hits under 500meters cause the little LTR like's to jump abit launching the 175SMK at 2630FPS:D

so a Brake looks to be in order:dancingbanana:
 
I have a Holland brake on my rifle, it is threaded, and to make it removable, we inserted a set screw to lock it into place. This prevents it from torqueing too tight to be remved by hand.

The rifle is a 6.5-270WSM, the recoil with this is similar to my .223, and I see all my impacts, even at 100 yards.

I can send you pictures of the set up if you like.
 
I had a VIAS Brake installed on my rifle. Still don't have it, I only got pic :( I should get a thread protector made while its still at the smiths.

MVC-310S.jpg

MVC-309S.jpg
 
I like the Vais,but it kicks up way to much #### in the prone postion...


I would like to get and AI brake but I don't think they sell them....
 
Jamie said:
I like the Vais,but it kicks up way to much s**t in the prone postion...


I would like to get and AI brake but I don't think they sell them....
Click to expand...

I wanted a OPS INC Brake but Jeff could not get them. So I settled for the VIAS. Plus with my barrel contour it was hard to find a brake that will take the profile of the barrel.
 
Yes, I mis-matched the OD, my first rifle so I still have a lot to learn. But it shoots well, so I am happy. And the brake does what it is supposed to do.

Got it from Hollands, as it is less than $100, or was. On Brownells they are still < 100 so either way it should not be a problem.

They need to be reamed to 20 thou over the cal you are using, but again this is a minor problem.
 
RobertMcC said:
I wanted a OPS INC Brake but Jeff could not get them. So I settled for the VIAS. Plus with my barrel contour it was hard to find a brake that will take the profile of the barrel.
Click to expand...



roger that bro:cool:its a great brake and works very well


look up the Badger FTE :dancingbanana: I like the front of it:D
 
Jamie said:
roger that bro:cool:its a great brake and works very well


look up the Badger FTE :dancingbanana: I like the front of it:D
Click to expand...

Yeah I think thats the brake I'll get for my other custom rig. Surprise another Mauser LOL Pretty much the same as the one in the picture, But thinner barrel, I do believe 26" and not 24", More lower profile stock and 10rd detachable mag.

Dunno why I put a Brake on a already heavy Mauser I dunno. Just because I can I guess. I think my Mauser weighed in at around 16 LBS.
 
tank.......lol


I am trying to keep the LTR lite............but that Nightforce ain't......lol

and if I get the AICS 2.0 its going to be the "HSTR" HeavyShortTacticalRifle
 
Jamie said:
tank.......lol


I am trying to keep the LTR lite............but that Nightforce ain't......lol

and if I get the AICS 2.0 its going to be the "HSTR" HeavyShortTacticalRifle
Click to expand...

Yeah I got a P14 with well 308 HBAR that I'm gonna make it into a Short Tactical Rifle.
 
RobertMcC said:
I had a VIAS Brake installed on my rifle. Still don't have it, I only got pic :( I should get a thread protector made while its still at the smiths.
Click to expand...

McC if that is the Vais brake in the picture you are refering to, it looks alot different than mine, are you shure it's a Vais or a different model perhaps?
bigbull
 
You must log in or register to reply here.
Back
Top Bottom