Muzzle Brakes for PCC's

[Boomer686]

Do you guys offer brakes for PCC's? Looking for 9mm, .40S&W & .45ACP

Thanks,

 

[True North Arms Corp]

We have a lantac in 9mm 1/2x36
https://truenortharms.com/ar15_default_store_view/lantac-dragon-muzzle-brake.html

Also The Reverse fake cans with brakes are available in 1/2x36
https://truenortharms.com/ar15_default_store_view/fake-can-suppressor-reverse-style-with-brake.html

Other than that we can drill out most other devices if possible
https://truenortharms.com/ar15_defa...ce-modification-machining-for-9mm-40-cal.html

 

[Boomer686]

Excellent. I'll be picking some out and confirm with you (not heat treated) prior to order.

 

[juancarlos]

Interesting, so can you do it for 1/2x28 TP?

 

[True North Arms Corp]

Interesting, so can you do it for 1/2x28 TP?

Your question is a bit unclear,
If you're asking if we can modify a 1/2-28-threaded muzzle device to accept 9mm projectiles, the answer is usually yes depending on the brake.

 

[wicked_police]

Do you have a lot of these in stock?

We have a lantac in 9mm 1/2x36
https://truenortharms.com/ar15_default_store_view/lantac-dragon-muzzle-brake.html

 

[shadow01]

1/2-36 will work on Freedom Ordanance FX9 ?

 

[True North Arms Corp]

Do you have a lot of these in stock?

We have a lantac in 9mm 1/2x36
https://truenortharms.com/ar15_default_store_view/lantac-dragon-muzzle-brake.html

we are phasing those out. All we have left are (1) each of the 1/2"-28 for 5.56, the M14xLH for 7.62mm, and the 1/2"-36 for 9mm.

 

[True North Arms Corp]

1/2-36 will work on Freedom Ordanance FX9 ?

I believe FX9 uses 1/2"-28 but please double check with your firearm or supplier.

 

[M&P 40]

FX9 uses 1/2 x 28

 

[juancarlos]

Your question is a bit unclear,
If you're asking if we can modify a 1/2-28-threaded muzzle device to accept 9mm projectiles, the answer is usually yes depending on the brake.

Yes, this was my question. The link you provided for this service very clearly states it is available for 5/8x24 TP only. Hence the question.

 

[juancarlos]

Can both of these in 1/2x28 be done to accommodate 9mm?

https://truenortharms.com/ar15_default_store_view/krinkov-style-flaming-swine-muzzle-device-knurled.html

https://truenortharms.com/ar15_default_store_view/landmine-linear-compensator.html

 

[buckbrush]

I thought 1/2x28 was industry standard for 1/2 brakes?

 

[True North Arms Corp]

I thought 1/2x28 was industry standard for 1/2 brakes?

Many manufacturers use 1/2"-36 for 9mm,
Some newer models like the FX-9 seem to be moving to 1/2"-28.

 

[buckbrush]

1/2x36 must be real fun to find tooling for.

 

[Uisge]

9/16x28 for 40?

 

[tmc2318]

so I need a flash hider for my Ruger PC Carbine 9mm version and from what I know the threading is 1/2"-28 threads. Would like this one in 1/2"-28 (part # SKU 688737046552-8) not 1/2"-36:

https://truenortharms.com/ar15_default_store_view/a2-style-9mm-birdcage-flash-hider-1-2-36.html

 

[Smitticus]

Also looking for a good Ruger pc recommendation.

 

[Boomer686]

9/16x28 for 40?

It always used to be.. not sure anymore though as brakes in that pitch seem harder to find all the time now.

 

[True North Arms Corp]

so I need a flash hider for my Ruger PC Carbine 9mm version and from what I know the threading is 1/2"-28 threads. Would like this one in 1/2"-28 (part # SKU 688737046552-8) not 1/2"-36:

https://truenortharms.com/ar15_default_store_view/a2-style-9mm-birdcage-flash-hider-1-2-36.html

I checked this regular A2 flash hider, the hole is about 11mm diameter so 9mm will go through fine. https://truenortharms.com/a2-style-birdcage-flash-hider.html