My Anschutz 1827f review and range report

Olyar15

Regular
Rating - 100%
8   0   0
Location
Bowser, bc
I've had this rifle now for about a month, and have about 1200-1400 rounds through it. Mainly SK Standard plus, Rifle Match, Magazine, and I recently ordered a couple of bricks of Center X. For those that don't know, this is a biathlon rifle, and uses a Fortner action, which is a kind of straight pull-back action that you operate with your index finger and thumb. It allows for very fast reloads without having to move your hand significantly.

2gx37d1.jpg

2iizfuv.jpg


Because this is designed as a biathlon rifle, it doesn't work well on a front rest. Luckily, it does have an accessory rail along the bottom of the forend, and I was able to cobble together some sort of benchrest adapter out of some scrap wood.

wva7mc.jpg


As far as fit and finish goes, what can I say? Standard Anschutz quality. The wood stock is beautifully finished. And the ergonomics of the grip is just about perfect for my hand. I also really like the adjustability of the stock. Cheek rest height, length of pull, even the trigger distance can all be adjusted. The trigger itself is amazing. Incredibly crisp and light. It all ends up making this such an enjoyable rifle to shoot.

The only cosmetic blemish is on the end of the barrel. The gun comes with the stock biathlon front sight already installed. When I removed it, there was something that looks like paint residue on the barrel. I tried using some gun cleaner which didn't work. I then tried some metal polish, which seems to work, but I wasn't sure if that would damage the nitrided finish of the barrel, so I left it mainly as is.

346patl.jpg


I only have a couple of issues with the gun. First, with the bolt open, the magazine doesn't drop free. With the bolt closed it will drop free. This isn't a big deal and it may even be the intended behaviour. The other issue is more a design issue. Again, this is a rifle that is designed solely for biathlon. As a result, it doesn't have a dovetail groove on the front of the receiver, which makes mounting a scope a bit more difficult. You can only use a cantilever mount, which reduces the choices drastically. The only mount I could find in Canada is a BKL mount, which works fine, but if you want to mount a scope with a 30mm tube, there is only one BKL mount instead of several different heights like there are for 1" tubes.

2w5kawj.jpg


As far as how accurate this is, well, I'm certain that it will shoot 1/2" or even 1/4" groups all day. However, I can't. So keep that in mind. So far, I've found that it shoots well with all the Lapua ammo I've tried. I haven't noticed a significant difference between the SK+, Rifle Match, and Center X.

The setup: Caldwell front and rear rest.

affrxd.jpg

ere4j8.jpg


Results, about a month apart:

4l4mpw.jpg


eimjon.jpg


Many of the fliers are 5th shots. Basically, I seem to try so hard not to screw up the 5th shot that I end up screwing up the 5th shot. Good news is that I have a lot of room for improvement, and I'm sure it will be a while (if ever) before I'm able to outshoot the gun.

Final verdict: I love this gun.

Seriously, words cannot describe just how nice the Fortner action is to operate. I feel like Homer Simpson and his hospital bed, when I take out the gun and just play with the action, it is so slick and feels so good. The trigger is by far the best I've tried. It makes every other gun I own almost painful to operate, including the Geissele trigger on one of my ARs. The only significant drawback to this rifle is the ridiculous price, which unfortunately limits the number of people that get to try out this action. I'm really surprised that no one else makes something similar for a cheaper price. Even at $2000, it would open up the rifle to a broader audience. Still, if you are looking at getting one, I'm sure you won't be disappointed.
 
I only have a couple of issues with the gun. First, with the bolt open, the magazine doesn't drop free. With the bolt closed it will drop free. This isn't a big deal and it may even be the intended behaviour.

Charles,

Nice shooting! Your mags should drop free with the bolt open or closed. Does it happen with all 5 mags or just one?
 
That's a very nice rifle. Thanks for the review. Your benchrest adapter interests me as I have a couple of rifles with accessory rails and I'd like to fashion an adapter for benchrest use. What did you use to attach the wood "plate" to the rail?
 
That's a very nice rifle. Thanks for the review. Your benchrest adapter interests me as I have a couple of rifles with accessory rails and I'd like to fashion an adapter for benchrest use. What did you use to attach the wood "plate" to the rail?

That part came from a Versa-Pod bipod that came with another rifle. Since I don't really used bipods, I removed it and had it sitting in my spare parts pile.

2lc5wqo.jpg


344wgme.jpg


Not sure if it was co-incidence that it happens to fit the Anschutz rail, but I suspect it was intended. I then found a short enough bolt that happened to have the same thread pitch as this part. Ideally it works better with 2 of these parts in order to prevent the adapter from twisting around the vertical axis while in use, but I only had one, which is why you see that strip of wood that fits into the channel.

Unfortunately, I have no idea what that part is even called, or whether you can purchase it separately. I tried looking on Nordic Marksman's site, but couldn't find anything similar. The closest I could find are accessories that fit the rail. They do make a benchrest adapter that might work on your rifle: http://www.nordicmarksman.com/Benchrest-Wedge.html. I thought about getting this, but it looks like the forend on my rifle is much more steeply sloped and that part wouldn't work properly. However, I thought about buying it and simply cannibalize the attachment device in order to make my own, but that seems like a lot of money just for a few parts.
 
Before it's too late, order up some replacement bottoms for your magazines. Nordic Marksman carries the aluminium ones, and they are a quick switch over.

I never even knew until I broke one of mine and had to ask about it, so I was directed to the aluminium replacements. They are quite nice little parts, for how simple of a job they do.
 
Thanks for the details and information, Charles. I'll have to try to find the dimensions of the Nordic Marksman benchrest wedge to determine what it will fit.
I just bought some 1/2" plastic and used 1/4'x3/4" stove bolts to mount to my rail.I cut the plastic to 2.5"x5" and counter sunk the nut till it was flush with the bottom.Total cost was under $10 to make 3 of them.
PM me your address and I'll send you one.
 
Rail Clamp

Here is the clamp piece that fits the rail from Anschutz.

http://www.nordicmarksman.com/Handstop-4738.html
 
Boy that's a fine looking rifle! Interesting to see it repurposed to bench shooting...I like it! I've always loved seeing those stock-mounted spare mags too. How are the mags held in there? Friction? Boy, that arrangement would be handy in the gopher fields!
 
The magazines are held by a ball bearing, so no damage can occur to the magazine. The amount of force applied by the bearing can be adjusted with a screwdriver. Gotta love German engineering.

I got the scope off the EE. There were a few of the 8-32x56 scopes for sale the last time I checked.
 
Boy that's a fine looking rifle! Interesting to see it repurposed to bench shooting...I like it! I've always loved seeing those stock-mounted spare mags too. How are the mags held in there? Friction? Boy, that arrangement would be handy in the gopher fields!

Here is how the mags are held in place...

62-magazine-compression-screw11541147.jpg


These simply screw into a threaded insert which is screwed into the stock. As Charles indicated there is a spring loaded ball bearing
on one end, and the other end is slotted for a screw driver so you can adjust the tension on the magazine. Pretty slick. lately, most of the high end
competition biathlon stocks use magnets to hold the mags in place.

Here is the fortner action repurposed to bench shooting... The F27A made by Peter Fortner for Anschutz.

f27a-benchrest-br-50-walnut7561177.jpg


f27a-benchrest-br-50-walnut7561679.jpg


f27a-benchrest-br-50-walnut7561832.jpg


f27a-benchrest-br-50-walnut7561675.jpg


f27a-benchrest-br-50-walnut7561312.jpg


f27a-benchrest-br-50-walnut756167975625867563843.jpg
 
Back
Top Bottom