My BCL 102 Range visit

Farmer2285

Member
Rating - 100%
139   0   0
Location
St. Paul Alberta
So had my BCl 102 for a couple months now and finally today was able to put some rounds down range. First off it's a used gen 2?!?( full ambi) original owner claimed 60 rounds through it and was able to get a couple moa groupings with 165grn match. I topped it with a Burris c4 3-9x40mm and decided to check for myself!

My fingers crossed that it was that accurate! All on a 100m bay. I started with a few 147grn norico, was getting 2-3moa ( only used to get the scope on paper. Then Winchester white box 147fmj was getting consistent 2-2.5" groups with the occasional 3" , federal premium with 150grn nosler ballistic tip, 2.5" groups, then moving to 165 grn federal premium with nosler ballistic tip were getting 1.5-2" consistent group, then tried Nosler trophy grade 165 accubonds and was getting 1.5-2" aswell. Then just out of curiosity I decided to use the hornady precision hunter in 178grn and dang I found the weight the gun likes I was finally getting 1" 5 shot groups!! Then tried some federal premium trophy 180grn bonded and they too were giving me consistent 1" groups.

The whole 4hr range day the gun ran flawlessly, not one malfunction, although I'm a little disappointed it doesn't like the 147-165 grain range of bullets tested thus far since I have an abundance ( all factory loads) I'm pleased that it shoots my two favourite hunting rounds consistently and reliably that I trust it to drop the big game animals I plan on hunting with it this fall! Although I may do a barrel further down the line!
 
So had my BCl 102 for a couple months now and finally today was able to put some rounds down range. First off it's a used gen 2?!?( full ambi) original owner claimed 60 rounds through it and was able to get a couple moa groupings with 165grn match. I topped it with a Burris c4 3-9x40mm and decided to check for myself!

My fingers crossed that it was that accurate! All on a 100m bay. I started with a few 147grn norico, was getting 2-3moa ( only used to get the scope on paper. Then Winchester white box 147fmj was getting consistent 2-2.5" groups with the occasional 3" , federal premium with 150grn nosler ballistic tip, 2.5" groups, then moving to 165 grn federal premium with nosler ballistic tip were getting 1.5-2" consistent group, then tried Nosler trophy grade 165 accubonds and was getting 1.5-2" aswell. Then just out of curiosity I decided to use the hornady precision hunter in 178grn and dang I found the weight the gun likes I was finally getting 1" 5 shot groups!! Then tried some federal premium trophy 180grn bonded and they too were giving me consistent 1" groups.

The whole 4hr range day the gun ran flawlessly, not one malfunction, although I'm a little disappointed it doesn't like the 147-165 grain range of bullets tested thus far since I have an abundance ( all factory loads) I'm pleased that it shoots my two favourite hunting rounds consistently and reliably that I trust it to drop the big game animals I plan on hunting with it this fall! Although I may do a barrel further down the line!

Mine likes 178 ELD-X and 150SST. ...around 1 inch 5 shot groups with both.
 
I had mine out for the 1st time. Its new to me, 60 rounds by previous owner Gen 2.

I love it! Fired 60 rounds of Hirtenberger ball ammo, had decent groups and not a hiccup. I used Magpul 20 round mags which worked great.

My worry, of course, is how long it will maintain operating well... seems lots of people are constantly having to replace parts. I dont even know what the warranty is for a second owner. Anyway, typical groups were 1.25" to 1.5" at 50 meters (had other rifles to sight in so I had to use the 50 meter range). Im sure I could have done better there definitely is shooter error there, and for 1983 surplus ammo Im very happy with it.

View attachment 197147
 
Back
Top Bottom