My Cooper arrived today

S

stubblejumper

CGN Ultra frequent flyer
Rating - 100%
69   0   0
Location
Camrose
I received my Cooper Jackson Hunter today.I am very impressed with the fit and finish of the rifle,the smoothness of the action,and the crispness of the trigger.The stock is very rigid,quite comfortable,and the decellerator is a nice touch.Overall,the rifle is very well designed.Now I just have to wait until the 280AI dies arrive,so that I can shoot the rifle.
 
Post Pictures! You could get by using the expander ball off a 7mm Rem Mag die, and the seater will work too! I used 257 Weatherby dies for my 25/06 AI until I got my dies. I assume with new Nosler Custom brass all you need to do is run the expander ball into them to clean the neck up! Enjoy!
 
Coopers rock!! My M22 Varmint 26-06AI. Love the stock on those Jacksons

IMG_2239.jpg
 
Wookie316 said:
Post Pictures! You could get by using the expander ball off a 7mm Rem Mag die, and the seater will work too! I used 257 Weatherby dies for my 25/06 AI until I got my dies. I assume with new Nosler Custom brass all you need to do is run the expander ball into them to clean the neck up! Enjoy!
Click to expand...

The Nosler brass needs no prep whatsoever to load...I bought some in the standard 280, they are neck sized, trimmed and deburred and have the flash holes deburred, just prime, dump powder and seat a bullet.
you can seat bullets with a 7 Rem Mag die.
 
[/B]
Rembo said:
The Nosler brass needs no prep whatsoever to load...I bought some in the standard 280, they are neck sized, trimmed and deburred and have the flash holes deburred, just prime, dump powder and seat a bullet.
you can seat bullets with a 7 Rem Mag die.
Click to expand...

That's what I thought! I just thought a guy may have to run the expander ball over the neck just to make sure they were 100%. In case of shipping damage or something along those lines?
 
You must log in or register to reply here.
Back
Top Bottom