My 'Dlask-Knoxx-Mossberg' 870... Fresh Paint (post #16)
- Thread starter G37
- Start date
- Location
- Mostly at the Range
Hey,
That's the kind of gun that piss' off a Liberal!
I love it!
That's the kind of gun that piss' off a Liberal!
I love it!
captain2k_ca
CGN frequent flyer
- Location
- Lethbridge
Actually I meant the Knoxx, it doesnt telescope as easy as it should on mine, takes quite a bit of force to open or close it all the way.......
aha... the adjustable stock is not AR smooth, but it goes to it's limits with no problems at all. Perhaps try some plastic friendly lube (Ballistol or Tetra Gun Lube).
You can also remove it to check out the insides (maybe you have some plastic flashing binding?); get some vice grips and pad the teeth, then grip onto the "steel nut" and pull out all the way, then the stock will slide right off the tube (as long as you keep holding the nut out to its limit).
Good luck sorting that one out
I am sure it is not a major issue.
You can also remove it to check out the insides (maybe you have some plastic flashing binding?); get some vice grips and pad the teeth, then grip onto the "steel nut" and pull out all the way, then the stock will slide right off the tube (as long as you keep holding the nut out to its limit).
Good luck sorting that one out
I am sure it is not a major issue.
Last edited:
captain2k_ca
CGN frequent flyer
- Location
- Lethbridge
I doubt it, and am thinking the same thing.....it will likely smooth itself out over time......
But one of these days I will be bored enough to polish it, or whatever I can think of to make it work better
But one of these days I will be bored enough to polish it, or whatever I can think of to make it work better
- Location
- Mostly at the Range
Hey. I saw an AR stock adapter for the 870 in one of my magazines....
I'll looking trough my 100 or so...must go now if i want to tell you which one it is...
I'll looking trough my 100 or so...must go now if i want to tell you which one it is...
- Location
- Mostly at the Range
- Location
- Mostly at the Range
Jello,
How much is an 870 ? is the norinco copy worth it or not? much difference btw them?
Thx, hey guys post some pics of your guns that you dressed up
How much is an 870 ? is the norinco copy worth it or not? much difference btw them?
Thx, hey guys post some pics of your guns that you dressed up
- Location
- Mostly at the Range
Hello,
has anyone checked out the website I posted? it looks like a good thing the AR stock adapter, you can put the buttstock and the grip you like from you AR. tell me wat you think.
PS post something to keep the thread alive!!!
has anyone checked out the website I posted? it looks like a good thing the AR stock adapter, you can put the buttstock and the grip you like from you AR. tell me wat you think.
PS post something to keep the thread alive!!!
I almost did this...
http://www.wolverinesupplies.com/default.asp?Pg=11&do=1&FIID=10
But once I felt the recoil, I knew I had to go Knoxx.
I took it out today and did some 50m slug shooting... My group which consisted of 6 slugs were all bunched together in an area the size of the palm of a hand.
Tomorrow I do trap shooting - part deux.
http://www.wolverinesupplies.com/default.asp?Pg=11&do=1&FIID=10
But once I felt the recoil, I knew I had to go Knoxx.
I took it out today and did some 50m slug shooting... My group which consisted of 6 slugs were all bunched together in an area the size of the palm of a hand.
Tomorrow I do trap shooting - part deux.
G37 said:aha... the adjustable stock is not AR smooth, but it goes to it's limits with no problems at all. Perhaps try some plastic friendly lube (Ballistol or Tetra Gun Lube).
You can also remove it to check out the insides (maybe you have some plastic flashing binding?); get some vice grips and pad the teeth, then grip onto the "steel nut" and pull out all the way, then the stock will slide right off the tube (as long as you keep holding the nut out to its limit).
Good luck sorting that one out
Guys to separate the two stock pieces just pull the adjuster lever straight down with your fingers no vice grips needed! mine just slides off no problem.
G37 and myself did some trap today and as per usual two guys came over to point out that his 870 was totally illegal, (not restricted but illegal). Well we explained some of the fundamentals of firearms law to these guys, but they really didnt want to be told that under 18" didnt mean "illegal", kind of amusing watching their disappointment and confusion. Of course other guys had no problem with the little beast.
G37 said:Today I got my Shotgun back from Jo at Dlask... I had him fit (drill, tap, pin) my Mossberg Ghost Ring Kit to the 870 and his 12.5" barrel.
I also installed a Knoxx SpecOps stock which I bought from a fellow CGN member.
The pics do not do it justice, it looks and feels bad-ass.
I can hardly wait to go shooting this weekend.
Anyway, here's a couple pics. The last thing I want to do is repaint it... but that will happen at a later time
Enjoy!!
P.S. Yes, that is an extended Modified RemChoke sticking out at the end.
The New Pic:
That's one slick-looking 870. Sweet!
Setanta said:
Why do these dough heads insist on hassling people when they are too lazy and/or stupid to learn the law in the first place. I have shot my 14" HP9-1 at Ridgedale a couple of times and all of the guys just think it's cool.
