Looking pretty sweet punkrockboy! I just want to add a couple things for all the perspective buyers.
Firstly, with the stock in that position most people will have trouble seeing the irons, we designed this position to accomplish two things, the reduction of muzzle rise and comfort with optics.
Secondly, you will probably find that pretty much any red dot will feel right with this setup, I recommend an aimpoint (or similar) optic with medium height ring or most any Eotech will feel good to you. A MRD on the scout mount would probably be excellent with that setup as well. If you're mounting an optic to the FAB handguards then I suggest you line the inside of the plastic with foil duct tape (found at home depot etc.) to reflect some of the heat away from the plastic. This will greatly improve accuracy during rapid fire etc.
Finally, When you setup the height on the MultiHeight Adapter you should clean any oil off the screws and threads (there is always some on the parts) then add either blue or red locktite and toque it down. Otherwise It will loosen over time (+/- 200 rounds) and that will suck.
[/IMG]
