NEA AR15 warranty

Status
Not open for further replies.
BCL has agreed to cover my used NEA15 no questions. They put it in formal BCL writing. Perhaps justreach out being possitive. You have no idea if they needed to take any legal warranty coverage when they bought NEA. I suggest honey but can hear your frustration
 
Can Am closed your thread.

ht tps://blackcreeklabs.com/warranty/

Supposedly a 48 hr response as per their website.
 
huddles said:
BCL has agreed to cover my used NEA15 no questions.
Click to expand...

NEA had an amazing warranty, used it quite a few times. If BCL has the same warranty and they are covering NEA, there will be no problems getting a warranty fix. However, as said, you must go through BCL and not the seller, no exceptions.

Kamikaze11 said:
Can i ask , what is the problem with the gun
Click to expand...

Would be interesting to know...
 
Aniest said:
NEA had an amazing warranty, used it quite a few times. If BCL has the same warranty and they are covering NEA, there will be no problems getting a warranty fix. However, as said, you must go through BCL and not the seller, no exceptions.

BCL is NEA, same company new name.
Click to expand...
 
You were given an answer.

Your warranty is with the manufacture, not with Canada Ammo. They gave you information who to contact, do that.
 
Thanks for the help all you key board warriors.

I have tried many times to contact both Black creek and canada ammo with no results. Or at least till now. I have been contacted via email by canada ammo and assured black creek will contact me this coming week.

I didnt just come on here to bash a good company but rather get my firearm that i payed good money for fixed. My emails started dec 6 with no response from either till i started this thread. I hope my situation gets dealt with in an appropriate time.
 
NaStY5000 said:
Thanks for the help all you key board warriors.

I have tried many times to contact both Black creek and canada ammo with no results. Or at least till now. I have been contacted via email by canada ammo and assured black creek will contact me this coming week.

I didnt just come on here to bash a good company but rather get my firearm that i payed good money for fixed. My emails started dec 6 with no response from either till i started this thread. I hope my situation gets dealt with in an appropriate time.
Click to expand...

Laugh2 key board warriors, you’re welcome. Maybe if you put half the effort in going about your warranty claim the correct way it would have been dealt with by now.
 
M&P 40 said:
Laugh2 key board warriors, you’re welcome. Maybe if you put half the effort in going about your warranty claim the correct way it would have been dealt with by now.
Click to expand...

If you read my posts you would realize i ran out of options.

I have had several emails from canada ammo now and am just waiting for black creek to respond.

As for whats wrong with it. It wont chamber a round when cycled. The round jams into the ramp forcing the bullet into the brass case. If i just drop a round into the chamber and shoot it only half the case extracts leaving the front half of the brass stuck in the chamber.

I clean all my firearms religiously (wipe out) and only have about 400 rounds through it. I have shot PMC that it came with and some American eagle i bought from cabelas.

If someone on here can shed some light on it plz PM me. I would happy to talk about it.
 
NaStY5000 said:
If you read my posts you would realize i ran out of options.

I have had several emails from canada ammo now and am just waiting for black creek to respond.

As for whats wrong with it. It wont chamber a round when cycled. The round jams into the ramp forcing the bullet into the brass case. If i just drop a round into the chamber and shoot it only half the case extracts leaving the front half of the brass stuck in the chamber.

I clean all my firearms religiously (wipe out) and only have about 400 rounds through it. I have shot PMC that it came with and some American eagle i bought from cabelas.

If someone on here can shed some light on it plz PM me. I would happy to talk about it.
Click to expand...

Have you tried other magazines?
https://www.wingtactical.com/how-to-fix-common-ar-15-malfunctions-and-stoppages/
Failure to Feed / Chamber
 
NaStY5000 said:
If you read my posts you would realize i ran out of options.

I have had several emails from canada ammo now and am just waiting for black creek to respond.

As for whats wrong with it. It wont chamber a round when cycled. The round jams into the ramp forcing the bullet into the brass case. If i just drop a round into the chamber and shoot it only half the case extracts leaving the front half of the brass stuck in the chamber.

I clean all my firearms religiously (wipe out) and only have about 400 rounds through it. I have shot PMC that it came with and some American eagle i bought from cabelas.

If someone on here can shed some light on it plz PM me. I would happy to talk about it.
Click to expand...

I read your posts, the correct way would have been to contact BCL / NEA. I hope that Canada Ammo gets you sorted out but in the end they may still direct you to BCL.

Did you happen to change your buffer or buffer spring?

You mentioned shooting factory loads any reloads?

More insight would help diagnose your problem. You mentioned that it ran fine for 400 rounds, what if anything did you change once it started to act up?
 
Additionally, check your gas block and gas keys to make sure everything is tight as the rifle may be short stroking as well.
 
M&P 40 said:
I read your posts, the correct way would have been to contact BCL / NEA. I hope that Canada Ammo gets you sorted out but in the end they may still direct you to BCL.

Did you happen to change your buffer or buffer spring?

You mentioned shooting factory loads any reloads?

More insight would help diagnose your problem. You mentioned that it ran fine for 400 rounds, what if anything did you change once it started to act up?
Click to expand...



Maybe if you could have read my first thread you would have known what i have done to date to contact both canada ammo and black creek.

Canada ammo is now contacting me via email but I have yet to hear anything from black creek even after now 4 emails and a cc email from canada ammo to black creek. Not to mention the online filled out form with my serial number and issue im having not just once, but twice now......

Does this now help you understand i have done more than i should have to get some help from them?

I dont hand load for 223. Not worth my time. I have only shot factory ammo which i stated in my last post.

Nothing has been changed in or on the firearm since new.

inserting a mag into the firearm and releasing the bolt has nothing to do with the buffer spring and or gas block. I did not say there was a failure to extract or stove pipe or anything other than the rounds dont chamber.

When releasing the bolt after inserting the mag, the bullet in the brass gets pushed into its self. In other words it doesnt follow the ramp into the chamber.
 
Last edited:
No I’m dunce that way, it takes a couple times for me to understand LOL

Good luck with your gun, no point trying to help as you have it all figured out. If it’s not the mags or the ammo got to be the gun one would think.

Let us know how you make out.
 
Status
Not open for further replies.
Back
Top Bottom