Need 300 wsm loads - quickload input maybe?

[kevguy]

Santa brought me a 300 wsm for Christmas this year.

I am looking for some input on loads in terms of starting loads to max load.

28" barrel (Browning X-Bolt Target)
168 gr custom competition Nosler HPBT
H 4350 (open to other options)
LRM primers
FC 1-F brass (FL sized and trimmed)

TIA,

K

 

[Grizzlypeg]

I'm shooting 165gr bullets in mine, and using 69 grains of H4831SC.

I would suggest going to Hodgdon's website and looking at their recommended loads.

 

[cdn shooter]

Santa brought me a 300 wsm for Christmas this year.

I am looking for some input on loads in terms of starting loads to max load.

28" barrel (Browning X-Bolt Target)
168 gr custom competition Nosler HPBT
H 4350 (open to other options)
LRM primers
FC 1-F brass (FL sized and trimmed)

TIA,

K

66gr h,imr 4350 win brass, fed 210 or 215 primer. I'm not saying its magic for everyone but it is for me. btw velocity runs 3156 to 3168 at 5 c and I drop .5 gr once temp gets to 20 c . 26" barrel though

 

[old owl]

Accubond 180gr, RL-17 66gr win magnum primers 3180 out of a Browning A-Bolt

 

[BearClan]

168 TTSX
WW Brass
CCI250
65.5 H4350 (3050 fps)

180 TTSX
WW Brass
CCI250
62.5 H4350 (2945 fps)

 

[pockets]

If you are setting up for long range, you should be using the 208 amax, with RL22, IMR7828SSC, or H4831SC.

 

[cdn shooter]

If you are setting up for long range, you should be using the 208 amax, with RL22, IMR7828SSC, or H4831SC.

For velocity out of the 208 I've found Win 760 to be the fastest, most accurate.