Need a gunsmith

Labatt50

Labatt50

Member
Rating - 100%
43   0   0
Location
Cayuga, ON
I've got an old 870 mag with a tip broken off the ejector that allows the barrel to rock a bit in the action and is causing extraction issues. I need a competent gunsmith that has the staking tool to install a new one. I'd do this myself, but I don't want to buy the tool. I'm hoping to get this done for less than a hundred bucks. Anyone had this or the shell stop restaked in any of their Remingtons and had a good experience with a Southern Ontario gunsmith? If so, please share.

Thanks! :)
 
Labatt50 said:
I've got an old 870 mag with a tip broken off the ejector that allows the barrel to rock a bit in the action and is causing extraction issues. I need a competent gunsmith that has the staking tool to install a new one. I'd do this myself, but I don't want to buy the tool. I'm hoping to get this done for less than a hundred bucks. Anyone had this or the shell stop restaked in any of their Remingtons and had a good experience with a Southern Ontario gunsmith? If so, please share.

Thanks! :)
Click to expand...

Contact smoji on the boards here. He has done a lot of work for me, very competent and reasonably priced too. If you need any wood work done he is an absolute magician!

Good luck!
 
were abouts are you in ont .we have a great smith her close to brantford that has been doing this kind of work for 50 years DUTCH
 
Thanks guys for the replies.

I'm out of Hamilton, I think Smoji is a little far east for me, Brantford's a little closer. What's this fella's number?
 
You must log in or register to reply here.
Back
Top Bottom