Need a Hornady Bullet Feeder Die for 45ACP

K

kcwcc

New member
EE Expired
Rating - 100%
3   0   0
Henry, my usual go-to guy, is out of stock...anyone know where else I can find a Hornady bullet feeder die for 45ACP?
 
Glenzo said:
Epps in Orillia had them in stock about a week ago. Got both the .45 acp and 9mm. The .45 works great, the 9mm not so much.
Click to expand...
What are your issues with the 9mm?
Is it properly adjusted?
I have loaded probably 10,000 rounds of 9mm with mine.
The only issue i have found is if you are using plated bullets with imperfections near the base.
I've had no problems with Zero brand jacketed bullets.
 
thump_rrr said:
What are your issues with the 9mm?
Is it properly adjusted?
I have loaded probably 10,000 rounds of 9mm with mine.
The only issue i have found is if you are using plated bullets with imperfections near the base.
I've had no problems with Zero brand jacketed bullets.
Click to expand...


Could not get the bullet to drop no matter how I adjusted it. Was using Berrys 147gr RN plated. Finally I took some 320w/d sandpaper, wrapped it around a dowel and lightly sanded the inside of the bottom collet. It seems to work now but I need to find the proper size rigid tube to fit in the top. I didnt spring for the whole bullet feeder kit, just the dies. Will have to try it with my 147gr Zeros.

The .45 acp one worked the first time, right out of the box, with plated 230 gr RN and plated 200 gr SWC. Found some feeder tubes at Princess Auto that work perfectly.
 
You must log in or register to reply here.
Back
Top Bottom