need a SKS triger job in Canada..

[ertech]

hi guys anyone on this board would do a trigger job on a SKS in Canada?if so PM me please
thanks
Erick

 

[AlbertaBandit]

Its a simple DIY

 

[Saskatoon Reader]

Give Nick at Vulcan Gun Refinishing a call. He normally works on allied firearms but if the job requires a gunsmith, he may be a great choice.

 

[I Dont Care About You]

You can't turn a pigs ear into a silk purse. Stick in the softer MCarbo trigger spring and just live with it. Anything else is wasted money.

If you want a target rifle, buy a target rifle. An SKS just ain't it.

 

[Suther]

You can't turn a pigs ear into a silk purse. Stick in the softer MCarbo trigger spring and just live with it. Anything else is wasted money.

If you want a target rifle, buy a target rifle. An SKS just ain't it.

A lot can be done with the SKS trigger without spending any money...

 

[Buck1950]

The MCarbo spring is a good start. Easy to do and OP should get to know his gun to be able to clean it properly anyway. Polishing the Sear w/o 'major mod work' is also easy. You don't need to 'stone' or file the sear to Improve it. I polished the 'sear rail groove' and the receiver 'rail' it runs on, then lubed with Permatex PTFE Grease from CT. A world of difference.

 

[Buck1950]

And not a lot of semi-anything in larger calibers out there now, especially "New", let alone 'target rifles'.

 

[9.3 Hunter]

McCarbo and voila

 

[ertech]

thanks guys