Need Advice

[Satain]

Got a problem I think with my 1911. If I hold down the trigger while cocking the slide the hammer drops once it returns to battiery. Also if I have the slide of I can not #### the hammer. All I have done is replace the sear spring. Is this normal with a competion sear spring?

 

[the hammer]

What make and model is this 1911?

 

[Satain]

Sorry I gesus I should have posted it.
Norinco 1911 A1
and the Sear Spring is a "BCG - Pro Series"

 

[Words Twice]

Is this just more proof that norc's are no good?


Words Twice

 

[NAA]

You have to make sure the "sear spring" aka the three finger spring has the correct "bends" in each of the three fingers. Each finger is responsible for a different function. Not having the correct bends in the spring could cause what you are describing.

Put the stock sear spring back in & see if the problem goes away. But when you have it apart compare the two springs. The replacement should have the same "bends" in it that the stock one does.

 

[ian_in_vic]

Is this just more proof that norc's are no good?


Words Twice

Yup, that's it - damn Chinese crap

Of course I haven't heard a lot of "proof" from people who may have actually owned one, never mind put enough rounds through one to be needing a spring change. I have put enough rounds through mine to require a spring change, with no issues.