Need Data for 124gr Plated RN 9mm

[Buzzthat]

Hi there! I changed my powder last week for W231-HP-38. I am using Frontier Copper Plated 124Gr Round nose. I am not able to find a GREAT starting point for my load. I do not want to do 20 Try. If you have a good data, with O.A.L., please give me a hand!!! I already check the reloading data center at Winchester, there is no data for me there. I am using a P226 SIG. Thanks!!

 

[NShunter1254]

I use 4.1 grains of hp-38 with a 125 gr cast lead round nose oal of 1.130

 

[dinsdale]

Here is my AIM work up in 124 for my 75b

My AIM 124 Load workup:
Bullet Manufacturer :AIM Bullet Weight: 124 grains
Powder Type : 231 Powder Weight: 3.8 grains
Primer: CCI C.0.L. 1.100
Average Velocity : 912.4 Power Factor: 113

Bullet Manufacturer : AIM Bullet Weight: 124 grains
Powder Type : 231 Powder Weight: 4.0 grains
Primer: CCI C.0.L. 1.100
Average Velocity : 953.0 Power Factor: 118

Bullet Manufacturer : AIM Bullet Weight: 124 grains
Powder Type : 231 Powder Weight: 4.2 grains
Primer: CCI C.0.L. 1.100
Average Velocity : 1006.2 Power Factor: 125

Bullet Manufacturer : AIM Bullet Weight: 124 grains
Powder Type : 231 Powder Weight: 4.4 grains
Primer: CCI C.0.L. 1.100
Average Velocity : 1022.0 Power Factor: 127

Bullet Manufacturer : AIM Bullet Weight: 124 grains
Powder Type : 231 Powder Weight: 4.6 grains
Primer: CCI C.0.L. 1.100
Average Velocity : 1063.5 Power Factor: 132

 

[basicbill]

"AIM workup"?
I'm a newbie...don't know that phrase.
Is is a software for reloading?

 

[Trotter]

"AIM workup"?
I'm a newbie...don't know that phrase.
Is is a software for reloading?

AIM is a manufacturer of projectiles located in Hamilton, Ontario. just use the grain weight. i think they TMJ about 0.004" thickness of copper, so use the same data as for lead.

 

[buttman]

I'm loading 9mm with 124gr berry's round nose with Win231, 4.4gr and a COL of about 1.160". Glock 34 would fail to eject every round at 4.0gr.

 

[mmcintyre1220]

Aim 124 4.5 grain 231, win primer and seated to 1.125. Shoots great in the 92A1 and gen 4 glock 17. Also my friends sig loves it.

 

[hatman1793]

Ww231

For the 124 grain plated 9mm bullet, the perfect target load is 3.8 grains of WW231. If you want a little more velocity, go to 4.0 or 4.1.

 

[SKS50]

Berrys 124 gr. Hollow Base RN Thick Plated 5.0 grs. Power Pistol COL 1.160"

Thicker plating lets you push these bullets to 1450fps in open guns in calibers like .38 Super so it want be a problem using these in full power 9mm loads.