Need help finding 9mm load data

[crazy]

I have some 95 Gr. s.w.c cast bullets and some 140 Gr. s.w.c cast bullets. I can't find load data on these bullets for my 9mm. Hoping somebody out there could help me.

 

[moosedude]

http://www.thehighroad.org/archive/index.php/t-584924.html

Highroad has lots of reloading info. For your 140 gr stuff, just use the 147 gr cast info, its so close it wont make any difference. Standard load work up applies.

Dont worry about the swc designs, just use cast lead data for the closest weight you can find and work it up

 

[crazy]

Thanks moosedude

 

[moosedude]

Np, oh and I found some low weight load info in my Hornady book if you want it. Just tell me what kinda powder you're using

 

[crazy]

I got a little bullseye, a little hp-38, and lots of ww 231

 

[sly mantis]

hp-38 and ww231 are the same.

 

[ambishooter]

I found this and might be doing some reloading very soon.

data.hodgdon.com/main_menu.asp

 

[moosedude]

for the 95 gr with bullseye 4.3 gr would be an absolute max and for win 231 4.6gr OAL at around 1.1 don to about 1.07. I would tend to stay on the side of a little long when working them up. And those numbers are MAX laods back off 1 gr or so to start

 

[crazy]

thanks ill give those loads a try