Hello Gentlemen,
I would appreciate your help and advice on the matter of feeding problem with my handgun.
So I have this pistol which falls into correct serial range for one of the Nazi contracts. This is probably the reason I want to fix it, rather then to get rid of it. I like it and want to keep it as all pre 1946 stuff, but it does not feed most of the time I would say. Original WW2 magazine feeds only if 1 round in mag, and does not feed if 2 or more. Post war mag does not feed no matter how many rounds present. Post war mag I purchased from fellow CGNer and it was working in his Star B.
I took pistol apart (found that spring guide is missing, but it should not affect feeding) and made pictures below. I tried with dummy round and snap-caps and live rounds (at range) - issue with feeding is the same.
Here's the pistol.

Two mags (sorry for some blurred pictures). One is WW2 Gardia Civil and second is post war marked with STAR

Bottom one is post war

Left is post war

Feeding ramp from different angles




Now this is how ww2 mag looks with only one round, note the angle. With only one round and this angle this mag will feed the round. Lips on this mag are open more wide than on post war mag.

This is the same ww2 mag with 2 rounds, note the angle or round now is different

This is 1 round in post war mag, and angle will be the same no matter how many rounds inside.

Trying to feed from the ww2 mag with 1 round. Works fine.

Trying to feed from the ww2 mag with 2 rounds. Bullet stuck at feeding ramp which looks too steep in my opinion (but I have no other Star B to compare).

Same picture from different angles



Trying to feed from post war mag with no matter how many rounds, stuck at feeding ramp.

Same from another angle

Same with slide installed

So I would be glad to hear any help/suggestions.
I also would appreciate if somebody in GTA could borrow me his STAR B barrel and mag or allow me to visit him with my barrel and mags to check and compare.
I would appreciate your help and advice on the matter of feeding problem with my handgun.
So I have this pistol which falls into correct serial range for one of the Nazi contracts. This is probably the reason I want to fix it, rather then to get rid of it. I like it and want to keep it as all pre 1946 stuff, but it does not feed most of the time I would say. Original WW2 magazine feeds only if 1 round in mag, and does not feed if 2 or more. Post war mag does not feed no matter how many rounds present. Post war mag I purchased from fellow CGNer and it was working in his Star B.
I took pistol apart (found that spring guide is missing, but it should not affect feeding) and made pictures below. I tried with dummy round and snap-caps and live rounds (at range) - issue with feeding is the same.
Here's the pistol.

Two mags (sorry for some blurred pictures). One is WW2 Gardia Civil and second is post war marked with STAR

Bottom one is post war

Left is post war

Feeding ramp from different angles




Now this is how ww2 mag looks with only one round, note the angle. With only one round and this angle this mag will feed the round. Lips on this mag are open more wide than on post war mag.

This is the same ww2 mag with 2 rounds, note the angle or round now is different

This is 1 round in post war mag, and angle will be the same no matter how many rounds inside.

Trying to feed from the ww2 mag with 1 round. Works fine.

Trying to feed from the ww2 mag with 2 rounds. Bullet stuck at feeding ramp which looks too steep in my opinion (but I have no other Star B to compare).

Same picture from different angles



Trying to feed from post war mag with no matter how many rounds, stuck at feeding ramp.

Same from another angle

Same with slide installed

So I would be glad to hear any help/suggestions.
I also would appreciate if somebody in GTA could borrow me his STAR B barrel and mag or allow me to visit him with my barrel and mags to check and compare.
Last edited: