Need help with RCBS Chargemaster 1500 program settings

6mm Shooter said:
My chargemaster is acting up and I need someone to list the parameters from their factory memory. Not just the first 4 but all of them.

Thanks
Click to expand...

First off, you read what you wrote down on a piece of paper for ALL the settings BEFORE you started. Now when you screw up, you can re-enter them. SERIOUSLY!

HSP_A1 (15.68) Low weight charge. Grs under target weight -> full spd to high spd.
HSP_B1 (3.42) Low weight charge. Grs under target weight -> high spd to slow spd.
HSP_C1 (1.08) Low weight charge. Grs under target weight -> slow spd to trickle spd.

MSP_A2 (39.20) Med weight charge. Grs under target weight -> full spd to high spd.
MSP_B2 (8.55) Med weight charge. Grs under target weight -> high spd to slow spd.
MSP_C2 (2.25) Med weight charge. Grs under target weight -> slow spd to trickle spd.

SSP_A3 (196.00) Hvy weight charge. Grs under target weight -> full spd to high spd.
SSP_B3 (42.75) Hvy weight charge. Grs under target weight -> high spd to slow spd.
SSP_C3 (11.32) Hvy weight charge. Grs under target weight -> slow spd to trickle spd.

SEL (065) Dunno
F_A (050) Hvy Charge grs
M_A (035) Med charge grs
S_A (006) Low charge grs
W_F (200) Full speed
W_M (100) Med speed
W_S (036) Slow speed
S_F (012) Scale sensitivity timeout fast speed
S_M (024) Scale sensitivity timeout medium speed
S_S (128) Scale sensitivity timeout slow speed.
FR1 (040) Dunno
FS1 (016) Dunno
FR2 (080) Dunno
SR1 (032) Dunno
SS1 (008) Dunno
SR2 (040) Dunno
DEC (000) Dunno
AT (000) Dunno

I wrote these down a few years ago so I'm not sure that they are totally valid. I'm not sure that is all there are. I don't know if these were the default numbers or something I ended up with when entering values and playing with the unit. I use something different to weigh with now, the CM1500 is long gone. If the numbers work, they work. If they don't, oh well.
 
Last edited:
Thanks Rick. I did write down the ones I changed but there is something wrong with mine now and I want to try reentering everything to hopefully fix it. The other day mine started speeding up at the end instead of slowing to a trickle. I have not changed anything in 5 years.
 
You must log in or register to reply here.
Back
Top Bottom