Need info on Hi Powers

IM_Lugger

CGN Ultra frequent flyer
Rating - 100%
216   0   0
Location
Hamilton
Now that I got a CZ I'm starting to warm up to Hi Powers, with a Glock on the way I don't know what to hate anymore! :p

Who makes these Browning and FN? or does FN make them for Browning? is one better than the other? What's the deal with mark 3? how many visions out there? the one I shot a years ago had a funky sights up to 800 yards or something like that. lol

and onces I've recently seen were in .40. where are all the 9's?
 
BHP MkIII

I won't profess to know schmick about Hi Powers other than after owning a few Beretta 92 series, a few different gens of the S&W double stack 9mm autos & others I discovered the CZ 75 pistol in the mid 80's and found it fit my hand best for a double stack 9mm.

Later, I bought my first BHP MkIII 9mm, sold the CZ, and never looked back. Being a leftie it is nice to have the ambi-safety on the MkIII. I later also acquired one in .40 S&W and love 'em both.

The .40 cal has a beefier slide & is the lower pistola in the pic below:

2004-09-04_000055_BHPs.jpg


My .02 for what it's worth.

2007-10-27_091302_1aCoffee.gif

NAA.
 
snip...
Who makes these Browning and FN? or does FN make them for Browning? is one better than the other? What's the deal with mark 3? how many visions out there? the one I shot a years ago had a funky sights up to 800 yards or something like that. lol
snip...

Browning is nothing more than a marketing name. Browning makes nothing, and hasn't since the @1890's. ALL "Browning" rifles, shotguns and pistols have been manufactured in Belgium or Japan.

FN in Herstal Belgium and FNMI in South Carolina are the only 2 "FN" manufacturers, other than a Japanese factory (which makes "Winchester" & "Browning" lever rifles and "Browning" shotguns)
 
Buckmark pistols and rifles are US made by Arms Technology Inc. Everything else is made by either FN or Miroku. Currently, BHP parts are made by FN in Belgium and assembled in Portugal.

If you're looking for one in 9mm, The Shooting Edge has some.
 
I read a mag that I had from a couple of years ago, and they touted the Charles Daily. Looked nice enough, but then I couldn't tell you the difference between the original or FN/Browning versions.:redface:
I was under the impression that the CF were still being issued WW2 stock?
Sorry not trying to highjack.
 
The "high Power" was the last design before Mr. Browning died,
who is best know for his 1911 design along with the tilt barrel cam lock operated design
on just about every other modern handgun made. HK, Ruger, Glock, Sig, etc...
He was commissioned by the French government to design a sidearm
for their military since his 1911 .45 was such a success with the US Military.

A French engineer working for 'FN' helped finish the design after browning died and was credited
for implementing his "double stack" magazine design (that being the first)where the magazine bullets are
configured in the magazine in a zig zag or 'off setted' formation thus creating a 'higher' amount of bullets in
a magazine than a conventional 'single stack' such as the Colt 1911, Hence the creation of the Browning "high power"

This gun is extremely accurate and very compact and slim(still having a longer than average barrel for its size) for fast target acquisition.
It has been in service since 1925 and is used by more than 60 Mil and Pol units across the world including the Canadian military.
During world war II The German waffen SS carried this pistol and it can be identified by certain markings.

One thing i have noticed about its design and i have seen no mention of on the internet
any where is the ability for this gun to be loaded, cocked, and fired with only one hand.
racking the gun can be done by holding the gun with one hand and pushing the
the lower frame nosing (below barrel) on the edge of a fixed object i.e. corner of a rock, desk, partial limb, etc... where
the action moves back since the recoil spring is internally housed. (the area you push against an object)

As far as the magazine disconnect goes, it can be easily removed which actually reduces the trigger pull and 'crispens' the trigger pull (patented terminology).
It was designed into the gun in case the weapon was to be lost to a combatant in CQC, where the operator could depress
the magazine release and make the weapon inoperable even if it was live fire chambered, cocked, and unlocked (not safetied)
and giving the operator a brief tactical advantage against an over powering assailant with say a knife.



There is all kinds of after market performance enhancements and accessories for these guns too.

Yes..... i may be a HP fan.

Disclaimer: All technical detail is 'hearsay' and may be deemed inaccurate and solely brought to discussion for entertainment purposes only.


The Pecka
 
Last edited:
Pecka ...very well said, for sure you're a real fan of HP pistols !
I sold mine long time ago and now I'm looking for another... maybe one manuf in 1940-45
HP are one of the best double stack pistols in 9mm
 
Pecka ...very well said, for sure you're a real fan of HP pistols !
I sold mine long time ago and now I'm looking for another... maybe one manuf in 1940-45
HP are one of the best double stack pistols in 9mm

I prefer the older HPs as well, but 1940-45 is the timeline of the German occupation guns - not exactly known for thier quality ;)

rs.jpg



Post war guns had a beautiful finish...

100_4338.jpg



The pre war HPs are rare and IMO, should be relagated to collectors pieces

000_0225.jpg



There are plenty of shooter Inglis HPs around

100_4340-1-2.jpg



The MKIII is a fantastic handgun, I recomend it with a few upgrades!

100_4790.jpg

100_4791.jpg



But once you have one HP in the safe, they breed like rabbits :p

100_5278.jpg
 
Back
Top Bottom