NEW! NEW! GSG-16 Non-Restricted NEW! NEW! Official Canadian Importer

images


baby-crying-tears.jpg
 
I got a fix for it.

If any of you have ever screw around with AR, you will know that the set screw for the gas block comes loose.

So what i am gonna do is see that hole just forward of the hammer!? I am gonna thread that set screw right in there.

 
Fingers crossed! I'm assuming, putting a screw in there, putting pressure down onto that metal block, it's gonna preload that spring and make the trigger pull lighter....
 
Well, i wouldn't say it doesnt come with it. I just havent figure out the proper OEM German way. Because this is a Canadian only option, the manual doesnt cover it. But after reading the Msr rx22 manual, i kinda see their logic and hence why i use a set screw the way the Rx22 is doing it.

Or they forgot to thread mine. Which is entirely possible, seeing how i have seen a Jetta with front leather seats and rear fabric seats before during PDI
 
So the fix in thoery works!! Just that the set screw wasnt long enough to give it any adjustment. If i were to add washer on the bottom side where it pushes up against the trigger bow. It lowers the pull weight, so the MSR manual is correct.

The collapsible stock is a classic army stock, the 2 bar are actually made out of metal and a soft rubber pad.

The fixed stock is of actual Norinco mp5 stock that needs trimming.

As for the lower that all the people have been asking, it is a Tokyo Marui mp5 that i have. Disclamier, it does take a few hours of modding and dremel to fit. If you sre shopping for a lower, this is what you need to look for.

The pin hole block at the end, and a complete empty lower. Some lower has partition on the inside.

If you ever find one, pm me the link and i can have a look for you.

So far the 2 successful lower i have gotten was:
My old school gen 1 blow back tokyo marui lower ( which actually has a trigger and hammer)
My other honger friend who has an ICS.


 
We should really ask the norinco importer here to see if they can bring them in.

As far as lower goes, i may have another one up for sale. If i dont screw up my third buddies gsg while converting.
 
I wouldnt bother with the norinco if they require modification.
Wasnt there a GSG16 review article that mentioned a fixed airsoft stock that fit out the box?

Youza.
 
Youzawhale said:
Wasnt there a GSG16 review article that mentioned a fixed airsoft stock that fit out the box?

Youza.
Click to expand...

The only review I saw was The Firearm Blog and he had a spare GSG-522 fixed stock, not airsoft. I contacted IRG about importing the stock but they told me it was discontinued.

Based on the input of a couple others on CGN I've purchased a CYMA airsoft fixed stock and will see if that fits once I get my hands on my GSG-16. If not I'll only be out $45.
 
If it can help : the Classic Army airsoft collapsible stock fits without mods, so i imagine if they make a fixed one it will too...

Youza.
 
Myrangetime said:
Cabelas is showing that they have stock online for the GSG 16 as well as the 110 rd mag. How does that happen before we get our preorders?
Click to expand...

The same reason people were waiting for their T1x preorders to arrive and I casually strolled into my local shop and bought one off the shelf. Preorders are the devil.
 
So, if the dealer is selling it with one magazine, are they are stripping one out and selling it separately?
 
You must log in or register to reply here.
Back
Top Bottom