New Product: Dominion Arms P762 in 7.62x25

Status
Not open for further replies.
OK CANPAR just brought me my P762, cleaned it up quickly and here's some quick pictures. I photo shopped the serial numbers off so they do not show on the right side.

The grip is large but I like a large grip and the rubber grip fits nicely in my hand. Trigger needs some work but is not terrible, single action is about 4 pounds, double action is quite heavy perhaps 12 - 14 pounds, certainly well over 10 pounds. Its something that surprises you the first time you pull the double action trigger, but I'm sure I can smooth it out and get used to it. I'm pleased with the finish and even the workmanship inside is smooth, did not notice any heavy tooling marks with a quick inspection. Magazine finish is also nice, theres a dimple 2 inches up on the front of the magazine that appears to be there to limit the mag to 10 rounds. This does not look good and was done crudely slightly off centre. Another means of limiting the rounds would have been better.

Overall I'm very pleased with the pistol, finish is actually much better than I expected. Thanks Canada Ammo for bringing this nice 7.62x25 bad boy to my collection!



 
Dominion Arms P762

StrikerSW said:
OK CANPAR just brought me my P762, cleaned it up quickly and here's some quick pictures. I photo shopped the serial numbers off so they do not show on the right side.

The grip is large but I like a large grip and the rubber grip fits nicely in my hand. Trigger needs some work but is not terrible, single action is about 4 pounds, double action is quite heavy perhaps 12 - 14 pounds, certainly well over 10 pounds. Its something that surprises you the first time you pull the double action trigger, but I'm sure I can smooth it out and get used to it. I'm pleased with the finish and even the workmanship inside is smooth, did not notice any heavy tooling marks with a quick inspection. Magazine finish is also nice, theres a dimple 2 inches up on the front of the magazine that appears to be there to limit the mag to 10 rounds. This does not look good and was done crudely slightly off centre. Another means of limiting the rounds would have been better.

Overall I'm very pleased with the pistol, finish is actually much better than I expected. Thanks Canada Ammo for bringing this nice 7.62x25 bad boy to my collection!



Click to expand...

My P762 has delivered yesterday just before supper. Very nice finish and was pleasantly suprised by quality. Took to range this morning and put around 200 rounds down range and never missed target once or had any mf or jams with steel cased surplus ammo. Last clip put all 10 rds in the black,much nicer to shot than my TT33. When will you have more mags in stock. Thanks CAMAM for the extras in the box.
 
How does the grip size compare with a fullsize single stack 1911?

StrikerSW said:
OK CANPAR just brought me my P762, cleaned it up quickly and here's some quick pictures. I photo shopped the serial numbers off so they do not show on the right side.

The grip is large but I like a large grip and the rubber grip fits nicely in my hand. Trigger needs some work but is not terrible, single action is about 4 pounds, double action is quite heavy perhaps 12 - 14 pounds, certainly well over 10 pounds. Its something that surprises you the first time you pull the double action trigger, but I'm sure I can smooth it out and get used to it. I'm pleased with the finish and even the workmanship inside is smooth, did not notice any heavy tooling marks with a quick inspection. Magazine finish is also nice, theres a dimple 2 inches up on the front of the magazine that appears to be there to limit the mag to 10 rounds. This does not look good and was done crudely slightly off centre. Another means of limiting the rounds would have been better.

Overall I'm very pleased with the pistol, finish is actually much better than I expected. Thanks Canada Ammo for bringing this nice 7.62x25 bad boy to my collection!



Click to expand...
 
SeamusBondy said:
Would you not have to worry about primer being struck from the round behind? or is the bullet nose round enough to not set it off in the tube mag?
Click to expand...

Some guy down in the US converted a Rossi 92 to 7.62x25 so it does work in a tube mag. All this talk of a 7.62x25 rifle is off topic so let's get back to the pistol.
 
Is there any chance of seeing some big old crates of surplus anytime soon to go with this gun? Perhaps a package deal with the gun and a big crate of 2280 rounds?
 
Sigh. Dammit CanAm, your deals are just too good to resist. I guess it doesn't hurt that my Tokarevs are currently out of commission. Those darn firing pin retainer pins!
 
drumstyx said:
Sigh. Dammit CanAm, your deals are just too good to resist. I guess it doesn't hurt that my Tokarevs are currently out of commission. Those darn firing pin retainer pins!
Click to expand...

That happened to me too. A small roll pin works well. I don't think I'll ever get it back out though.
 
pertain said:
Can any one upload a side by side comparison photo of this bad boy with TT33
Click to expand...

If no one else does, I'll try to remember when mine comes in.

livewire0129 said:
That happened to me too. A small roll pin works well. I don't think I'll ever get it back out though.
Click to expand...

Yeah, that's probably what I'll do. I ordered 4 of them at Tradex last week, but I haven't gotten any confirmation or shipping quote or anything for them, so I guess it's off to the hardware store I go.
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom