New XCR Owners

Throttle_monkey1 said:
Mine's in my house!! just picked it up, and will be taking pics in a few minutes
Click to expand...

Nice! I havent seen mine yet, just junk mail no delivery notice. Anyone else got theres already?
 
Got mine home on Friday, can't stop groping it :D Must have stripped and reassembled it a dozen times over the weekend!

Should have a range report + pics later this week!
 
Good to see that they are finally here. Might have to add one to the collection soon. Hopefully Wolverine has more on the way.
 
mine came today, questar mag's came same day as well (they sure fit short/flush, might need ranger plates), ammo was waiting allready now i just need to go shoot it :p
 
I have put about 200 rounds down range and am quite happy over all, i was pleased to find i could ring the 200yd gong with the supplied iron sights.

When the rifle is assembled i have just the slightest slop between the upper and the lower receivers (couple thou of movement, originating from the hinge pin), is this normal ?
 
Sixgill said:
I have put about 200 rounds down range and am quite happy over all, i was pleased to find i could ring the 200yd gong with the supplied iron sights.

When the rifle is assembled i have just the slightest slop between the upper and the lower receivers (couple thou of movement, originating from the hinge pin), is this normal ?
Click to expand...


Mine has a slight slop between the upper and lower also. No Biggie. I've had AR's that were the same and they shot every bit as well as the tighter fitting ones. I would however like to see if it's possible to tighten up the fit with some JB Weld or Devcon or something similar in the space behind the trigger group. Anyone tried something like this yet.?

sw
 
Mine is running perfect now.

Slop isn't an issue i guess, i did have to re-tighten the barrel allen bolt after 400 rds or so.

I was able to bubba the Noveske flash hider onto the rifle... thanks to a metal lathe and some welding.

The aimpoint scope is a joy to shoot with.

We have a steel gong at 200yds and it's no problem to tap that all day long if i do my part.

I threw the ranger plates on the 10 round Lar mags and they are now 9 rounders...

Fingers crossed that Wolverine Supplies will bring in a &.62 x 39 conversion kit some time.

Hoping for some pics this evening.
 
Wildbore said:
More pics would be nice, since so many people own them now.
Click to expand...

Here's a starter. I working on uploading a vid to photobucket.

IMG_0047.jpg


I now have a sidefolder on it.

SW
 
Rick chucks five.



Hope you like it.

Gas Setting 4 chucks the brass about 30 feet at 2 o'clock.! :eek::D I had a 10x12 tarp down to catch the brass and if it hit, it would skip right off. :rolleyes:

SW
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom