Norc 1911 Extractor Problem

[Ice14]

Hey all! I just got a Norinco 1911A1 in the mail today. 2nd one actually... first one had to be sent back because of sear spring problems. But yah, anyways.

I did the basic field strip and cleaned out all the grease and crap... and then put a thin layer of CLP on her... satisifed that she was clean, I did a function test. Everything worked like a charm until I put some rds in the mag and cycled them. Most of them get jammed. It looks like they are all catching on the extractor... like the extractor isn't letting them go.

Is this something that needs to be fixed? Or is it just stiff and needs a few rounds through her?

 

[Freedom Ventures]

... like the extractor isn't letting them go.

To confirm, you're saying that the round slides under the extractor hook as the slide move forward, then goes into battery. Then as you pull back the slide, the extractor maintains the connection with the round all the way to the end of the cycle back...

If this is it, your ejector is not working (or installed?)