Norc Np 201c or np-17 reviews

[tokguy]

M201 with loaded 7.62 x 25 rd hanging up

Hope this pic shows up I am new at this.

 

[theoneofthechuck]

Damned BlackBerry >< can't see what the pic is of

and now that I'm back at home.... there is no pic @.@ nutz

 

[tokguy]

Damned BlackBerry >< can't see what the pic is of

and now that I'm back at home.... there is no pic @.@ nutz

No sweat , It failed to show up anyhow. I'll try to find a geek to help me out

 

[theoneofthechuck]

Dood, just host the pic on photobucket.com and post the little img link. It's easy once you get the hang of it ^.^

 

[tokguy]

<a href="http://s940.photobucket.com/albums/ad243/tokguy/?action=view&current=Gunpics002.jpg" target="_blank"><img src="http://i940.photobucket.com/albums/ad243/tokguy/Gunpics002.jpg" border="0" alt="7.62 x 25 loaded failure to eject"></a>
Fail..

 

[tokguy]

Norinco M-201 cycling with 7.62 x 25 mm loaded round

 

[theoneofthechuck]

Ah ha ha HA now I see what you're talking about by filing down some of the breech for the round to be ejected proper... now, would that affect the lock up? or proper seating of the cartridge? or should I be asking these questions in the "gunsmithing" forum @.@


P.S. congrats on taking your picture posting virginity ^.^b

 

[tokguy]

Ah ha ha HA now I see what you're talking about by filing down some of the breech for the round to be ejected proper... now, would that affect the lock up? or proper seating of the cartridge? or should I be asking these questions in the "gunsmithing" forum @.@


P.S. congrats on taking your picture posting virginity ^.^b

I'd ask a pro; but then again you are probably going to hear " don't do this "
And I have to add in my defense , ' I took the pic after feeding a box through the gun'
Hence the crud visible in the pic...

 

[theoneofthechuck]

that makes sense, about the crud, and possibly about the "don't do this".... I'll possibly post the question on the gunsmithing forum... mind if I use your picture?

 

[tokguy]

that makes sense, about the crud, and possibly about the "don't do this".... I'll possibly post the question on the gunsmithing forum... mind if I use your picture?

Fill your boots