Norico tatical guns: anygood?

since this is in the shotgun forum, i assume your refering to a norinco shotgun....

do a search, theres tons of threads on the various models and their functionality.

However, what exactly do you mean by "accuracy," in a shotgun forum?
 
if your talking the yz thing with side folder
then no they are crap
if you have to by norinco get the rem 870 rip off, the pretty good
bbb
 
Lineman said:
I have the M-37 http://www.marstar.ca/gf-norinco/YL-1J4.shtm

I have used it and am very pleased with it. It works smooth and is a great inexpensive gun for a new shotgunner. :)
Click to expand...

I was wondering, at the end of the magazine tube, is that a welded piece to the barrel it self or cna it be removed ot add on a mag extension ??

thank you
 
Last edited:
sixty9santa said:
No mag extensions for the Ithaca knockoffs.
Get an HP9-1, best bang for the buck.
Click to expand...
Are you ferferring to the norinco gun I was asking to extend the mag for?

I was asking becasue I am a tool maker, so making one is 5 minutes, but I dont want to cut away that little mag holder or what ever you want to call it - if its attached or welded to the barrel it self??

thank you
 
VooDooMan said:
Are you ferferring to the norinco gun I was asking to extend the mag for?

I was asking becasue I am a tool maker, so making one is 5 minutes, but I dont want to cut away that little mag holder or what ever you want to call it - if its attached or welded to the barrel it self??

thank you
Click to expand...

That mag thingy is what holds the barrel to the rest of the gun, I believe.
And as a designer and machinist, nothing takes 5min:p, espaecially if you don't know first hand what it is your looking at:p , like me:D
They are brazed to the barrels.
My HP9-1 is due to come tomorrow, so I'll post pics her.
The HP9-1 is an 870 copy. Most of the parts are interchangeable between the two.
Not to mension that the 870 has tons of aftermarket goodies.
 
Last edited:
sixty9santa said:
That mag thingy is what holds the barrel to the rest of the gun, I believe.
And as a designer and machinist, nothing takes 5min:p, espaecially if you don't know first hand what it is your looking at:p , like me:D
They are brazed to the barrels.
My HP9-1 is due to come tomorrow, so I'll post pics her.
The HP9-1 is an 870 copy. Most of the parts are interchangeable between the two.
Not to mension that the 870 has tons of aftermarket goodies.
Click to expand...

my mentallity for the past 15 or so years was fas fast fast go go go, I work in a jobbing shop, so I often times do things as fast as possible, the complexity vary from job to job, but so does the quality, lol is 5 tenths enough? :D

brazed to the barrel eh,,,,,,might be easier to take off then I thought
yes 870 has TONS of goodies, do post pictures pelase

thank you sir
 
5 tenth is a reasonable enough tolerance:D
I should get her tomorrow, and I'll post pics the same day if my trip to the dentist is not too much of a pain.
 
sixty9santa said:
5 tenth is a reasonable enough tolerance:D
I should get her tomorrow, and I'll post pics the same day if my trip to the dentist is not too much of a pain.
Click to expand...

te most ventem eszre,,,,,,,maga magyar?

LOL take your new shotgun to the dentist, I ASSURE YOU he or she will make it painfree, not to mention FREE of cost!

take care and I sure hope to see that beatuy
 
sixty9santa said:
Igen, igen en magyar vagyok.
Nincsen sok magyar ezen a forumon (nincsen sok magyar Kanadaban!), csak egy paran.
Akik eszreveszik a nyuszit, mindig irnak egy par sort.
Welcome to the site fellow Hun!

Az othuni muhely:

http://www.canadiangunnutz.com/forum/showthread.php?t=38909&page=9
Click to expand...

holy ####, LOL - aye jaj de jo talalni mas magyarokat...........mindig keresem oket - hat en nem a par sort szeretnik erni, hanem egy nagy konjvet :D
maga akkor hol el? es meg kerdezhetem hogy hanj eves?
boldog vagyok hogy talakoztunk..........

"pleasure to meet you magyar barat"
--Krisztian
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom