Norinco 10.5 Freefloat easy or hard ?

[rocco]

Has anyone tried to free float a Norinco m4 ? Is there some crazy chinese welding going on or pins….lol

thanks guys

 

[Movado]

Easy take a Dremel cut the front sight post(not the gas block) and use some paint to touch up the bare metal, now you have a low profile gas block.

Use the Dremel again and cut the delta ring. Now you just need to buy a rail of your choice that use a regular barrel nut.

 

[Eternal_SiR]

I got mine out but it took some work. The pins on the Fsb were on there pretty good. The Delta ring needed a cheater bar. Having the right tools definitely helped

 

[Phat Eagle]

This is where Norcs run into trouble... Can be done, but needs a little ingenuity, the right tools and a lot of patience...

 

[enefgee]

I used a multi-piece rail, and a dremel to cut off the Delta Ring, Not exactly specialized tools.

 

[taprack9]

I did it, bought an NEA low profile gas block but couldn't get my pins out so I put the dremmel to work turned out great!

 

[taprack9]

The rail is a Troy FF Alpha Rail btw

 

[rocco]

Looks great !!!!! I guess I need to get a dremmal....lol I knew it....