Norinco 12" Coach Guns
- Thread starter Frontier Firearms
- Start date
The shotgun looks barely over 24" as it is.
- Location
- Not really sure.
Gun showed up today. A little better quality than I was expecting. Nice wood for the most part with good checkering. Unfortunately My stock has a split in it at the bottom where it rides along the bottom of the reciever alongside the trigger guard.
Looks like it may have warped and split So I will need to fix that or It will probably get worse after firing it.
Action is quite stiff but should get better once worked in a little. Did anyone elses have a bunch of sand in the barrels?, that was weird.
Hammer springs on mine are both strong, right hammer is a little rougher than the left. Triggers are slightly different in pull weight.
Over all Cool looking gun with some heft too it and decent quality for the price. Will likely post pictures shortly.
EDIT, update:
Looks like it may have warped and split So I will need to fix that or It will probably get worse after firing it.
Action is quite stiff but should get better once worked in a little. Did anyone elses have a bunch of sand in the barrels?, that was weird.
Hammer springs on mine are both strong, right hammer is a little rougher than the left. Triggers are slightly different in pull weight.
Over all Cool looking gun with some heft too it and decent quality for the price. Will likely post pictures shortly.
EDIT, update:
Last edited:
diesel_weasel666
CGN Regular
I wipe it down well and then brake-cleen the living hell out of it. White lithium grease the pivot points and wipe it down with 3-in-1 oil or something of similar viscosity. No.9 is terrible lube.
- Location
- Not really sure.
Mine is quite stick as well, it gets stuck and you have to force it a little, it kinda hangs up a bit and then breaks loose.
The gun is pretty tight and a little sloppy on the machining ect. It has gotten alot better just by opening and closing it dozens of times and some good lube.
Unfortunately My stock has a split in it at the bottom where it rides along the bottom of the reciever alongside the trigger guard.
Cracked stock on a new gun!!!!!!!! That's really bad
Have you received in that condition?- Location
- Not really sure.
Cracked stock on a new gun!!!!!!!! That's really bad
yes it came that way out of the box unfortunately. The barrels were also full of sand lol or perhaps it was silica sand?. not really sure.
Last edited:
longrange1
New member
- Location
- Regina,Sask
Recieved mine perfect gun for price and as always frontier firearms is awesome to deal with never have a problem with them
Mine's great cosmetically, but after I fired it today, I couldn't break it open. It would go about halfway and then stick. Took the better half of the afternoon to get the shells out.
Also, it's quite hard to shut. I'm not sure if the two issues are related. I'm sure there's just an area I need to polish up or file down, but I'm no expert.
Also, it's quite hard to shut. I'm not sure if the two issues are related. I'm sure there's just an area I need to polish up or file down, but I'm no expert.
- Location
- Not really sure.
Seem to be working fine so far.
[youtube]v8Ro5u-ReS8[/youtube]
[youtube]v8Ro5u-ReS8[/youtube]
- Location
- Prince Albert, Saskatchewan
We just added one back to stock. We should have more next week.
