Norinco Help please!!!!!

Morley

Morley

Regular
EE Expired
Rating - 100%
10   0   0
Location
Dartmouth, NS
Hello guys and gals.

I have lost the extractor for my M213 9mm. I was wondering if anyone knew of where to get one. If not, can someone with a M213 and a micrometer or vernier do some measurements for me so I can try to make one.

I don't want to shake each spent casing out after firing so I need help. Its just a hammer now unless I can fix it.

Thanks everyone!

~Morley
 
One of mine spit out the pin and the ejector and spring both jumped for freedom. Luckily I found all three of the parts. My fix was to use a punch to very lightly dimple the hole in the slide right by the end of the pin after shortening it so the end sits just under the lower edge of the hole. The dimple was put on at this lower edge as it took less to slightly dimple the metal inward and lock the pin from moving. With the correct size dimple the "damage" is all but invisible and the pin can still be knocked out past the dimple easily enough. It just won't come out from recoil anymore.

Another thought would be to degrease the pin and hole in the slide and carefully put in just the smallest possible drop of Loctite blue. Or use something like a little squeeze of silicone bath tub caulk to seal it. The silicone RTV rubber comes in black if you get it from the right supplier so it would be all but invisible, would hold well if degreased first and yet it would push out easily. Once it cures for a few hours remember to oil the (new) ejector or it'll be running dry. Once cured the oil won't bother the RTV rubber.
 
Thanks everyone

I truely appreciate your replies. Yet to no avail.

I am still reduced to shaking out the casing if I chose to shoot. I REALLY need help with finding how to get one.

I managed to get a spring and pin from a gent in Ontario. Great guy to deal with. He doesn't have any extractors though.

~Morley
 
Morley said:
I don't see why they wouldn't work. They are basically the same gun aren't they? Nobody has'em.

~Morley
Click to expand...

You tried TEC, and MARSTAR? Both list them as available. Did you try Gunnar at ARMco?

Numrich Gun Parts Corp. lists Tok parts.

I see TT33 parts on EBAY. Never hurts to ask the seller if they ship to Canada.
 
Last edited:
Called Armco.

I tried calling Armco today. I tried a few times throughout the afternoon, keeping the four hour time difference in mind.

Maybe they don't answer the phones on Wednesdays? Hopefully Thursdays are a go.

~Morley
 
Morley said:
I tried calling Armco today. I tried a few times throughout the afternoon, keeping the four hour time difference in mind.

Maybe they don't answer the phones on Wednesdays? Hopefully Thursdays are a go.

~Morley
Click to expand...

Gunnar claims you can get his attention quicker with an email than a phone call. Try emailing.

Other places to try might be Canada Ammo and Lever Arms.

Did you loose the parts at an indoor range or an outdoor range?
 
In or out?

I would hope that I could find all the little bits easily inside. Alas, mine went somewhere in the snow amongst eight people. No one noticed, but guaranteed someone stepped on the ejector.

~Morley
 
Morley said:
I would hope that I could find all the little bits easily inside. Alas, mine went somewhere in the snow amongst eight people. No one noticed, but guaranteed someone stepped on the ejector.

~Morley
Click to expand...

Bummer! May be a wait till the spring proposition and go at it with a strong magnet.

As mentioned try Numrich and ebay.

I'll be stripping my TT33 in the near future and can trace the extactor and mike the thickness it you are up to attempting to making one. PM me if interested.
 
You must log in or register to reply here.
Back
Top Bottom