Norinco m14s problems need some advice

trigger ass is really tight on the newer M14's, i use the tool in the but stock to put it in the hole in the guard and really gotta yank on it, loosens up after awhile and gets easier, there are youtube videos of it. 2nd you need to swing the locking mechanism off the front of the gas tube, it rotates off counter clockwise, shifting it 90 degrees is enough to clear the piston. mine was stuck a little from factory and i just used a plastic screwdriver handle to tap it loose. it is a very tight fit with the shorty. just look up a video on M305 shortie dissasembly and it will show how to do it.
 
Thx Cody got the trigger assembly out but the piston won't clear the lug do u mean remove the pin and unscrew the screw on the piston assembly?
 
I have the same problem, but even rotating 90 degrees still doesn't quite give me enough space to clear the bayonet lug-it's just hitting it. What can I do?
 
undo the gas nut, then undo that 8 shaped pieces that tighten everything the stock remove the stock. push the entire gas assembly forward out of the grooves it lines up in and rotate it so you can remove the piston
 
You must log in or register to reply here.
Back
Top Bottom