Norinco M213 9mm load success

[caperbound]

Hi, I haven't fired this yet so I really don't know what it needs to cycle properly. I will be loading 124 TC lead with Unique powder. For a starter I plan to use the load data and OAL from the Lee 2nd Ed book but am just curious if anyone else has a recipe that works good. Thanks

 

[Cactus]

Hi,

I have loaded and shot WW cast 125gr RN through my m213, I use a mid range load of HS6 and the gun functions fine so I suggest you start with a mid range load as well.

One thing I found with the gun is that my cast bullets needed to be sized to .355 (Lee .356 sizer die). The first batch I shot as cast and a few (5 of 25) were too wide and got stuck chambering. My 213 has the tightest bore of all my 9mms so it might be a good idea to pull the barrel and use it as a go/ no go to check your reloads. A Lee factory crimp die is a big help as well.

Cactus

 

[caperbound]

Thanks Cactus, I'll try that.