Norinco M93 - First Impressions

JimV

CGN frequent flyer
Super GunNutz
Rating - 100%
47   0   0
Location
Vancouver Island
My wife recently decided, with some trepidation, to buy her first handgun. She's not (yet) a dedicated gun nut, so price was a factor.

I sat by her elbow giving moral support while she called Marstar. A couple of weeks later the parcel arrived.

The box features a big blue eagle with graphic cues suggesting about 1950, very appropriate for a retro design. The gun was well coated in grease, but it cleaned up nicely after a few minutes with some rags and solvent.

The first thing you notice about the M93 is its size - it is tiny. It's a clone of the Colt Woodsman, and it resembles a three quarter scale Luger. It is also very light and the raked grip is small. These are advantages to it's new owner, since she hates heavy guns and has a small hand.

The second noticeable thing is the finish. Like a lot of recent Norinco products it's better than you expect. The dark "blueing" is even, there are no nasty sharp edges (though some care is required with the slide release) and the plastic checkered grips offer a firm hold. The slide can also be easily pulled with a finger and thumb, another thing my wife likes.

Today we took it out to the range for a live fire test. The first results were not encouraging. She loaded the 10-round mag with Winchester 333 and every other round failed to eject. However, after switching to Federal Champion Target SV it was smooth sailing. The little pistol loved that ammo and went through 6 or 7 more mags without a hiccup. I don't know how closely the M93 resembles the Woodsman mechanically. It may be that this design prefers SV, which was all that was available when the Colt was originally made. Next time we'll try some other HV just to see what happens. (The mags, by the way, have a sturdy follower button and are very easy to load.)

It's hard to evaluate accuracy from today's results. Firing from a sand bag she put most of the rounds inside an 8 inch bull at 15 yards and got a couple of 2 inch 5 shot groups. At 25 yards they were at least on the paper. She's not very familiar with iron sights or with pistols, so I think this was OK for a novice.

I'd have to say that the M93 is not a bad choice for a first handgun, especially for someone with small hands and a limited budget. It's well balanced, seems to be well made, operates easily and works well with the right ammo. The trigger is surprisingly good and the slide locks open on the last shot. There are not many semi-auto .22s that offer these features for $150.
 
Mine is fussy with ammo as well.. Seems to like Blazer 40 gr., American Eagle 38 gr, Winchester, and Federal bulk 525 pack 36 grain. It really hates Federal 40 grain solid and Remington Thunderbolt Ammo.

Once you get the right ammo it will be smooth sailing!

Enjoy your new little gun!! :D
 
I bought one second hand for my boys, and it's an excellent value for the dollar.

I've fed mine bulk packed Federal solids and hollow points, and cheap as mud Aquila, and not had a single misfeed or failure to extract.

As a pair of 10 year old boys first gun, it's hard to beat. I only wish spare mags were cheaper. BTW, mine holds and feeds 10 rounds.
 
Never got around to shooting mine. Still brand new and over 5 month's I still haven't touched the darn thing. I am debating weather or not to put it up for sale. Is it worth it? How much do these go for?
 
I had two and both fed nearly everything without much trouble. Even ran with Rem subsonic ammo. One mag only fit in the gun it came with, other than that no complaints.
 
A friend of mine told me about this little pistol you could get an extra mag for and have delivered to your door for $200 bucks. I couldnt resist so i ordered one since a new m93 shipment had just arrived. Ive had mine for a year now and is shooting even better than it did when i got it. No real feeding issues, reliable with both magazines and reasonably accurate. I am still very happy with it. So is everyone that shoots it.
IanC
 
The m93 is a great pistol. It has very few FTF. I feed it all different brands of ammo. If your M93 is picky on ammo there are several spring mods that can be done with aftermarket springs. If you get a FTF after the mods it's the ammo. Another word of advice do not do a complete disasemble of the pistol, they are a pain in the ass to get back together and function the first time you do it. Also the rear sight set screw, take it out and blue locktite it in or it will go away.
 
Mines reliable with most ammo and quite accurate. The rear sight is not as tight as it should be. I've heard of others with this problem. Anyone have a simple solution?
 
Great to hear that your wife is now a pistol shooter!!! My wife & I just got back from the range shooting our Glocks with an Advantage Arms 22 rimfire conversion kit. It's so nice to be able to swap the kit between our G17 & G22, we went through several hundred rounds of 9mm, 40 S&W and 22 rimfire. Good times!

Cheers
Jay
 
A friend of mine told me about this little pistol you could get an extra mag for and have delivered to your door for $200 bucks. I couldnt resist so i ordered one since a new m93 shipment had just arrived. Ive had mine for a year now and is shooting even better than it did when i got it. No real feeding issues, reliable with both magazines and reasonably accurate. I am still very happy with it. So is everyone that shoots it.
IanC

Very nice. Where is this?
 
I just bought one for myself on Friday. Just waiting for the transport papers to try it out. In the meantime, I'm trying to find out more about it.

I got it for $2 with an order at More Guns Supply, a former sponsor here from what I gather (anyone know what happened with that?). It shipped in its box but it was covered in brown oil. Neither it nor the box seem new at all, but hey, 2 dollars for a handgun is hard to pass up. Anyone know their production dates, maybe based on serial numbers? I'm curious, is all.

More practically, where do you guys buy your spare mags? It shipped with just one and it'd be a pain to reload it manually every 10 rounds.

Also, are your slide releases also on the right side of the gun? I found that odd and never saw this anywhere but on left-handed pistols, but even if it was, the safety is on the left side. Is that strange or is it just me?

EDIT: My bad, I meant slide release, not mag release. The mag release is on the underside, exactly where it should be.
 
Last edited:
I just bought one for myself on Friday. Just waiting for the transport papers to try it out. In the meantime, I'm trying to find out more about it.

I got it for $2 with an order at More Guns Supply, a former sponsor here from what I gather (anyone know what happened with that?). It shipped in its box but it was covered in brown oil. Neither it nor the box seem new at all, but hey, 2 dollars for a handgun is hard to pass up. Anyone know their production dates, maybe based on serial numbers? I'm curious, is all.

More practically, where do you guys buy your spare mags? It shipped with just one and it'd be a pain to reload it manually every 10 rounds.

Also, are your mag releases also on the right side of the gun? I found that odd and never saw this anywhere but on left-handed pistols, but even if it was, the safety is on the left side. Is that strange or is it just me?

Slide release perhaps? The mag release is a heel clip.
 
It shipped in its box but it was covered in brown oil. Neither it nor the box seem new at all, but hey, 2 dollars for a handgun is hard to pass up.

More practically, where do you guys buy your spare mags? It shipped with just one and it'd be a pain to reload it manually every 10 rounds.

Also, are your slide releases also on the right side of the gun? .

The oil and old looking shipping package is normal for this gun. It is most likely still a "new gun"

Spare mags are not cheap and i believe Marstar sells them.

Slide release is indeed weird to most. Takes a bit to get used to.

Enjoy your new pistol.
 
Back
Top Bottom