Norinco mag fed shotgun

[fleabaggins]

Hey all,
is anyone familiar with htis product as advertied on SFRC website? It looks like the same thing as the Dominion Arms Grizzly mag fed. Are the mags interchangeable? Compatability with Rem 870 parts, esp barrel? Quality of the Norinco vs the DA?
Thanks all.
PS I have no affiliation with SFRC, just noticed it on their site.

 

[Chemist]

They come from the same factory. Same gun

 

[Silver_Back]

They come from the same factory. Same gun

So to clarify for a Dominion Arms/Norinco newb!

the norinco mag fed shotty

1) is compatible with most (if not all) 870 parts (as it is a 870 clone)

2) can use dominion arms/grizzly mags

thanks in advance for the info!

 

[Silver_Back]

anybody?

 

[Vyrtual]

anybody?

The threads on the stock bolts are different. Ie; you can't use the bolt that comes with an aftermarket 870 stock on it. Simple trip to a nut and bolt place fixes that small prob though

 

[Silver_Back]

The threads on the stock bolts are different. Ie; you can't use the bolt that comes with an aftermarket 870 stock on it. Simple trip to a nut and bolt place fixes that small prob though

Cool man! thanks for the info!

 

[Silver_Back]

But other parts
-such as the pump grip, stock/stock adapter (for a pistol grip)
should all be the same?

 

[Vyrtual]

But other parts
-such as the pump grip, stock/stock adapter (for a pistol grip)
should all be the same?

From what I've seen, all the 870 parts fit fine. I've changed the forend, the stock, added sling plates at the stock etc and the only prob I've seen is the different threads.

 

[Silver_Back]

From what I've seen, all the 870 parts fit fine. I've changed the forend, the stock, added sling plates at the stock etc and the only prob I've seen is the different threads.

Cool man!
sounds good. Thanks for the info, that is exactly what i needed to know.

You mentioned that the only problem that you saw was different threads, did this cause any issues when installing the new/aftermarket parts?

thanks in advance for the info!

 

[aftermidnight]

Might want to check out my 'review' thread for some more info. Firing time to come on Saturday if I get the time.

 

[Vyrtual]

Cool man!
sounds good. Thanks for the info, that is exactly what i needed to know.

You mentioned that the only problem that you saw was different threads, did this cause any issues when installing the new/aftermarket parts?

thanks in advance for the info!

No prob man.

No they don't cause issues. The bolts aren't attached to the stocks, so as long as you have the correct type and length, you're all good. The threads are really close, just not quite exactly the same. Like I said though, just take the bolt that was in the gun originally and take it to a nut&bolt place to get the length you need. My buddy just redid his with all sorts of bells and whistles, an that's the only difference we noticed.