North American Arms parts

K

kswan

Member
Rating - 0%
0   0   0
Location
Northern Ontario
I was just given a North american arms grizzly No 20 .22 rifle. I've done some research on finding a magazine for it with no luck. Just wondering if anyone has any idea where i might find one.

Thanks
Kelvin
 
Perhaps of no help to you OP but in order to get my old Grizzly running I made up a new floorplate, magazine guide, and latch so that I could use an old unknown (but similar to Lakefield) magazine I had kicking around.

It took a lot of tinkering, really a lot, but it looks good and it works. I gave up on finding an original magazine long ago, but I could simply swap the original parts back in if luck were ever to smile upon me.
 
Waba said:
Perhaps of no help to you OP but in order to get my old Grizzly running I made up a new floorplate, magazine guide, and latch so that I could use an old unknown (but similar to Lakefield) magazine I had kicking around.

It took a lot of tinkering, really a lot, but it looks good and it works. I gave up on finding an original magazine long ago, but I could simply swap the original parts back in if luck were ever to smile upon me.
Click to expand...

I'll look into that, thanks.
 
OP: be careful if you find a place to order parts. Yours is North America Arms Co. rifle, aka NAACO. These are different from the North American Arms. No "n" on the end of America. Not sure if North American even offered rifles, but it might save some grief. I had a couple or three at one time, but at least two went to a collector.
 
Have you checked Triple K ? long shot, but they do make a lot of stuff, and the last few yrs , their quality seem very good.
I bought a bunch of Hi Standard , and Gevarm mag from them , and just as good as the orignals.
 
kjohn said:
OP: be careful if you find a place to order parts. Yours is North America Arms Co. rifle, aka NAACO. These are different from the North American Arms. No "n" on the end of America. Not sure if North American even offered rifles, but it might save some grief. I had a couple or three at one time, but at least two went to a collector.
Click to expand...

Thanks.
 
Waba said:
Perhaps of no help to you OP but in order to get my old Grizzly running I made up a new floorplate, magazine guide, and latch so that I could use an old unknown (but similar to Lakefield) magazine I had kicking around.

It took a lot of tinkering, really a lot, but it looks good and it works. I gave up on finding an original magazine long ago, but I could simply swap the original parts back in if luck were ever to smile upon me.
Click to expand...


I picked one up that the previous owner had tried the same thing. After a lot of tinkering I finally got it running smooth. I don’t think that rifle has seen the light of day for 5 years, it just sits in the safe.
 
You must log in or register to reply here.
Back
Top Bottom