Np-22
- Thread starter 1895GS
- Start date
It's a spare trigger bar spring and slide stop lever spring.
Changing them not give you any better DA pull.
In order you to change your DA pull you have to change main spring, you will see it if you remove the grips, long one.
Yeah and the long pointed pin is to disassemble your mag. I got some after market mags they came with the same pin, but not as sharp pointed.
Changing them not give you any better DA pull.
In order you to change your DA pull you have to change main spring, you will see it if you remove the grips, long one.
Yeah and the long pointed pin is to disassemble your mag. I got some after market mags they came with the same pin, but not as sharp pointed.
I just figured this out.
The springs are just spares.
On top of that, the locking block is very difficult to replace, I marred up the trigger pivot pin trying to align the flats.
Thanks goodness this is a Norinco that I'm butchering and not a real Sig.
I have many pictures to post. Stay tuned.
Danimal247
CGN Ultra frequent flyer
- Location
- Toronto, ON
I just figured this out.
The springs are just spares.
On top of that, the locking block is very difficult to replace, I marred up the trigger pivot pin trying to align the flats.
Thanks goodness this is a Norinco that I'm butchering and not a real Sig.
I have many pictures to post. Stay tuned.
looking forward to pics, hopefully they are bigger than the rest of the tiny ones on this forum
Pics are up.
http://www.canadiangunnutz.com/forum/showthread.php?t=524427
I tried real hard with my dinky Canon SD700 IS.
I hope to buy something a little better to snap better pics.
