O.A.L With CAMPRO 124RN in your 9mm?

[NB Rifles]

Am interest what others are using running for a A.O.L in the 9mm with that bullet. Have you found the AOL to made much of a difference in accuracy?
Thanks.

 

[Hoag]

Factory recommendations (from CAMPRO) for loads including OAL can be found in this thread:

http://www.canadiangunnutz.com/forum/showthread.php/1377898-CamPro-Load-Data-for-9mm-Luger-45ACP-and-223-Reminging

As for me personally, I use 124gr CAMPRO HP loaded over 3.8gr VV N320 and 1.105 OAL

 

[Viper26]

OAL has more affect on feeding than accuracy

 

[PharoH]

Really depends on what the pistol likes, ive gone from 1.095 all the way up to 1.169 in 9mm pistols (124gr rn)

 

[L Frame]

1.135 works great in a glock 17 for campro 124 rn

 

[madcow]

its what loads into the mags too

 

[fdc]

I load two lengths with this bullet: 1.10" for everything but my 1911 which really likes 1.15" to feed properly every time. There is some overlap on some of the guns but over time I have found that these two lengths in my guns work best. It's all about feeding.

 

[B]

1.12" for me, 1.10" for the 147. I have to load at least that short or else the bullets jams into the rifling of my CZ.

 

[Wolf@TS]

1.125" works in both my M&P and the JR carbine.

 

[john92awd]

I load to 1.125 for multiple pistols. Works well I'm my cz, I've tested it in the chamber with a plunk test

 

[SoylentD]

1.12 for 147, 1.14 for 124 grain campros. CZ shadowline and Glock 17G4.

 

[NaviDave]

1.12 for 147, 1.14 for 124 grain campros. CZ shadowline and Glock 17G4.

The Campro load data says 1.06 for 147gr. Why would 1.12 be better?

If the round is longer - would it feed more reliably? (I am about to start loading 2k of these).

 

[silverfoxdj]

tagged

 

[kodiakattack]

I go 1.128 oal for beretta 92a1 , with 124g cam pro and4.2g of 700x. With a light factory crimp.

 

[new and novice]

1.14 for me. Can't remember where my tight group powder is set at right now, but it is fairly low.

 

[madcow]

I normally load 1.125 for Plated 124, but I noticed today when I load 1.110 on LRN I notice I'm just on the edge of the lube, so I drop it to 1.10

 

[Don'tkillbill]

1.15 works fine in my CZ85 and sig 226. I miss my 124 grain bullets my last batch was 115 because of availability.

 

[thechineseguy]

1.12" for 124gr for me
4.0gr n320

 

[trebor2880]

1.075 O.A.L. 124gr./3.5gr. Bullseye in a Glock 17

1.081 O.A.L. 124gr./5.1gr. Power Pistol in CZ 85 and Norinco NP29

 

[Gunsforfun]

I use titegroup for my reloads and notice that Campro load data says 4.1- 4.4grns while Hodgdon load data says 3.6- 4.1grns for a 124grn RN. Why are the Campro loads higher? Has anyone tried the Campro recommended loads?