Official Barnes Load Data 338 Win. Mag. Loaded with 210 Barnes TTSX.

Q

Quigly

CGN Regular
Rating - 100%
41   0   0
Location
Southern Ontario
Hi,
I am hoping a fellow Gun Nut(s) can help me out. I just purchased 6 boxes of Barnes .338, 210 grain, TTSX at a good price, not knowing that I could not find a Barnes reloading manual for sale anywhere. So, I was hoping someone has the latest edition Barnes manual, that is, before Remington went out of business. If so would you be able to provide me with load data for the 338 Win Mag with 210 grain TTSX bullets.
While I am at it, I need load data for 300 Win Mag. 200 grain TSX, because I found 100 of those at a good price as well.
As far as powders are concerned could you list the loads for all powders, as I have a couple of pounds of various powders.
Thanks in advance.
 
dan belisle said:
My Barnes manuals don't list that bullet separately. All the 210's except the coated ones are in the same load data. Which powders do you have to choose from? - dan
Click to expand...

Thank you, but which manual are you referring to. If it's number 3, that does not do me any good, because the ttsx bullets are not listed in that manual. If it's manual #4, that is what I need.
 
Thank you Dan.That is exactly what I was looking for. I have six pounds of H4831, and 3 pounds of IMR
4350. I will try both those loads, and see what works best. Do you have any experience with the 338, 210 grain ttsx?
 
Eh fellow shooter ...so what I did is played with h4350 it took about ...almost 2 boxes of bullets and slowly testing with powder ...and verified with lab radar for velocity....rifle browning bar safari ....my loads are running 2770 FPS I produced a 3 shot group under 3/4 “
Remington brass
H4350
Fed 215 mag primers.
Coal 3.340
Schmidt and bender 5x20 Ffp x56 ...I have dope throu isnipe out to 900 meters ...will I shot that far ....nope
But I hunt some clear cuts that are 600..700 meters wide and I always see moose ...my 300 wby could not do the job at those distances..so now I have the 338
Cheers and happy shooting
 
davide montini said:
Eh fellow shooter ...so what I did is played with h4350 it took about ...almost 2 boxes of bullets and slowly testing with powder ...and verified with lab radar for velocity....rifle browning bar safari ....my loads are running 2770 FPS I produced a 3 shot group under 3/4 “
Remington brass
H4350
Fed 215 mag primers.
Coal 3.340
Schmidt and bender 5x20 Ffp x56 ...I have dope throu isnipe out to 900 meters ...will I shot that far ....nope
But I hunt some clear cuts that are 600..700 meters wide and I always see moose ...my 300 wby could not do the job at those distances..so now I have the 338
Cheers and happy shooting
Click to expand...

Owned and used both, I really doubt the 338 WM will outperform the 300 Wby at those distances. 340 Wby or an 8 Rem Mag, yes. I guess it will make a bigger hole, and that counts too. - dan
 
What Dan said. Back the day I used the 300 wby and 200 noslers at very close to 3100. I now use my 338 but it’s not for trajectory. Used the 340 lots to but with heavy bullets at full power it’s kick is on another level.
 
You must log in or register to reply here.
Back
Top Bottom