Opinion on Winchester vs Federal primers

mule

Regular
Rating - 100%
90   0   0
Anybody have any significant comparative knowledge about these in small pistol, large pistol and large pistol magnum sizes? Good or bad experiences? Sorry if this might have been addressed previously.
Thanks, Mule
 
Last edited:
Federal primers are made of a softer metal, they take up more space to store. As far as ignition, they rate about the same. I believe they are not reccomended for Lee handheld auto-primers. As a general statement they seem to be perfered primer for revolver as they require a softer hit and the hammer spring can be reduced. Generally in this part of the country thhey are priced higher than Winchester and not so available.
 
Used both with no problems. As mentioned, a gun with a light hitting firing pin may like Federal better.
 
This is very subjective but the only difference seam that Federal are the softest, followed by Winchester and the other end of the spectrum, in the hard corner ; the CCI nickel plated primer.

I buy what is the cheapest in 5000 lot and Winchester win hand down each time !
 
I have had issues with Winchester Small pistol primers, but never with Federal.

CCI (rifle) and Federal (rifle and pistol) are all I use, but I will use Winchester shotgun primers.

RePete.
 
Back
Top Bottom