oversize primers !

[blaser.306]

I just bought a brick 1000 federal primers #210 that are over size ! they measure .2115 and will not seat with any priming tool that I own ! The lot # is 2GX689 . I have an email in to ATK right now . You may want to watch for these if you are purchasing now ! These were bought from WSS in Saskatoon last week . As I said they will not seat with any of the priming tools that I own in either comercial or mil surp brass ! There is ! primer that is jammed in the case/shell holder that is going to require a trip to the backyard with a punch/hammer and a set of earmuffs/plugs and safety glasses !

 

[NormB]

I Have some well used brass that those primers might well fix.

NormB

 

[Dogleg]

Want to sell them?

 

[tigrr]

Hmmm my wins measure .2105

 

[blaser.306]

Hmmm my wins measure .2105

But I bet the leading edge of the battery cup isn't sharp as a knife and cutting into every primer pocket they encounter !

 

[CandyGirl]

The same thing happen to me, but only with GRAFT and NORMA brass. I used my press to prime them down.

 

[SUPERMAG]

primers

Bought 5000 LPP Federal and they kept jamming in the Dillon primer filler traded them for win LPP withsomeone who wanted the softer primers and ended my problems

supermag

 

[dead meat]

I`ll have to check my supply, bought 2 cartons last year but haven`t got into them yet. Ususally use win. or cci.