p14 6mm musgrave build

[antiqueguy]

well I have collected most of the parts now for this build. I have a .243 barrel that's pretty much a bull barrel and a milsurp sporter stock as well as a complete barreled action with a good .303 barrel.

im thinking I need to have the barrel profiled a bit its a little heavy because it will end up too barrel heavy and would not point real well from the shoulder.

also wondering if I should just look for another action and just have epps chamber this in one in .303 epps since the bore has lot of rifling and no rust.

 

[antiqueguy]

there wasn't enough material in the for end on the p14 stock for me to inlet the heavy barrel.

so I went through a parts box and found a bubba Lee Enfield for end that was junk around the action but has enough meat if I were to graft it onto the p14 stock I can inlet the heavy barrel. its a lighter colored wood but I think it will turn out nice maybe with an ebony for end tip.

 

[antiqueguy]

who does bolt jeweling kind of what this p14 bolt done this way. also for those who have built a p14 or p17 how do you guys fill the duck pond