Para Ord 14.45 Extractor/Ejector tweaking.

[PoFF]

I've been shooting my Para 14.45 for about year now, about 5000 rounds through it, all reloads which ran flawlessly, never a FTF or FTE, but...

... it is somewhat a minor problem but that's quite annoying, the gun ejects the brass forward. Spent casings usually land a feet or two in front of the gun, and 2-3 feet right. This is annoying because I save my brass like if it was made of gold (reloader thing, heh), but I always have to ask the RO for a ceasefire to get it because it's in front of the firing line.

Is there a way to tweak an extractor or ejector (don't know which is the cause) to make it eject the brass behind the gun, or at least sideways?

Thanks

P.S. This Para is the older model, it has a regular extractor, not the Power Extractor.

 

[Nor1]

You could try a longer ejector. I put one in my Norc. and the cases generally land to the right about 4 feet away. I use a regular style extractor.

Nor1

 

[PEI ROB]

http://www.edbrown.com/images/parts/Extend_Ej.gif

Sounds like your ejector is broken. Take the slide off and insert your mags. The mag must NOT contact the ejector when you insert it firmly.

Cheers

 

[thecollector]

Spent casings usually land a feet or two in front of the gun, and 2-3 feet right. This is annoying because I save my brass like if it was made of gold (reloader thing, heh),

My 13-45 does exactly the same, and I too place near gilt value to fired cases!
I dare say that this may be a Para characteristic; the functioning of my Para with cast semi-wads is near flawless though.