PDW builds - Lets see them, and share results

AbHobbyist

AbHobbyist

CGN frequent flyer
Uber Super GunNutz
Rating - 100%
1674   0   1
Location
Vernon, BC
Hello all!!

Spring is in the air, and now its time to earnestly test all those builds we have been working on over the winter.

PDW's carbean's (as some people say :D ) have tweaked my interest as of late. I have done some reseach and there are some good looking builds hear on the board, but many of the threads are less than current

With this in mind, I was wondering if those that have them, might share them with us. I was thinking that build specs, along with target and balistic results would make for an interesting and infromative thread.

We are all busy people, so feel free to start with build specs, but make sure you come back to share target and ballistic results with us as time permits.

Thank you all for taking the time to read my thread, and I look forward to any and all constructive contributions.

Regards and all the best

AbH
 
Not sure if this fits the PDW criteria. I've only had it out for function testing, so no targets to post yet, but it works 100%.

Model 1 Sales 10.25" Upper:redface:
Unknown semi bolt group (MPA marked?)
Bushy Lower
Micro H1
Daniel Defense Fixed Rear sight and Daniel Defense Aimpoint Micro Mount
Magpul Moe Hanguard, Grip, trigger guard and MVG
Magpul CTR
Magpul ASAP Sling plate
Magpul Moe Light Kit and Fenix LD10 Light
Weight as shown: 7lbs.
IMG_1092.jpg
 
Snap!
Clob...Nice piece...simple...light....functional without a lot of extraneous s**t.
I think that you just hit one out of the park..
This is pretty much exactly what I have come to realize is the Holy Grails of PDW.
I have exactly the same set up, except for a cobbled on light.
Bravo!...(fade out to the sound of a single pair of hands clapping....)
 
Clob :

Edit to add:

My understanding of PDW are short barreled carbines (regardless of platform or Caliber), that small enough for concealment, yet much more potent than a handgun. If one feels that a pistol caliber sub gun/Carbine should be their PDW, well then have at it, but be prepared to show/substantiate your stance and results.

With that in mind..............

I really like what I see, so keep at it my friend.

Just make sure to leave some room for results!! ;)

regards and all the best

AbH
 
Last edited:
Wheres Blaxsun with his beauty 7.5" blaster? I think thats more along the lines of what hes looking for. nice pieces though guys :)
 
Time for a new pic of this thing

IMG_0228-1.jpg


Old style with Reflex site

IMG_0182.jpg


I have a smaller Spikes AR but dont have pics of it. Its really old style with carry handle
 
^^^ Nice!!! Like that more with the CTR and the monotone. I took the doors off by UBR because I think it looks like ass. But that's just me.

TheLMT.jpg


LMT Defender MRP CQB
MagPul UBR
MagPul BAD
MagPul AFG
Millet DMS-1
Badger Tactical Latch
LaRue SPR 1.5 (clone, it works but will be putting a P.E.P.R. on it.)
PWS FSC556
 
Last edited:
^^ Beautiful! Wow there are a lot of nice high dollar kits in this thread! Paulinski, I'm just wondering what your rifle weighs?


Though I like the clean look of folding sights, I don't think they have any place on a PDW. I think that at the ranges one would typically use a PDW, speed should dictate the sight set up. If you're optic goes down you would want to immediately transition to your back up sights, pausing to flip them up may take more time than you have.

Of course this is all metal masturbation because most of us only have to worry about paper targets.
 
Bad PDW

Here's mine along with the specs. I have since switched back to a Trijicon 42mm Reflex and added some Tango Down rail panels. The DPMS bolt and Enidine buffer are new, so I'm looking forward to trying both out (time and weather permitting).

Dlask-SOCOM 7.0" CQB
Dlask 7.0" Upper with low profile gas block, free-floating quad rail and PWS CQB flash hider
Tango Down rail covers, LaRue index clips, Gear Sector QD sling mount and hand stop
Noveske Troy M4 folding BUIS (front tritium upgrade), Aimpoint Micro T1 on Matech mount
DPMS TiNi bolt carrier, bolt and firing pin; PRI Gasbuster charging handle

SOCOM Lower with elongated trigger guard, CAA modular grip w/storage, BAD A.S.S. safety
Stag LPK, KNS anti-rotation pins, KAC 2-stage trigger, Magpul BAD lever, PWS extension tube
Enidine hydraulic buffer, CTR mil-spec stock w/enhanced butt pad and LaRue cheek RISR
Dual PMAG 30/5-rnd magazines (1st generation) with rubber grips and aluminium mag coupler

bad-cqb.jpg
 
You must log in or register to reply here.
Back
Top Bottom