pet loads for your ar10 762nato

[badboybeeson]

So going to take a stab at loading for the semi auto ar10
Looking for peoples loads they have run for a semi auto 308
What i have right now
Varget
3031
Camp to 147 fmj
Hornady 168 amax

Of course ill do work up loads but wondered on what loads people are running and also min loads to cycle in a semi.

 

[PitBull1973]

I'm running
168 gr SMK and 167 senar
42 gr Varget
CCI LR
Seated to mag length

Very good load in my LMT

 

[badboybeeson]

I'm running
168 gr SMK and 167 senar
42 gr Varget
CCI LR
Seated to mag length

Very good load in my LMT

Very good . Have you chron the load?

 

[PitBull1973]

Very good . Have you chron the load?

Yes . 2580 fps
Another load that I'm developing will be with RE15 it's suppose to be very accurate as well

 

[heyrosco]

I've heard that 3031 used to be a go to for National Match loads. I have some but have never tried it. I use the Hornady 150 FMJBT and put it over 43.0 gr of IMR-4895. Chrono's 2650 from my M14.

 

[badboybeeson]

Thanks everyone
are you using a seprerat crimping die?

 

[PitBull1973]

Thanks everyone
are you using a seprerat crimping die?

Yes

 

[PitBull1973]

I've heard that 3031 used to be a go to for National Match loads. I have some but have never tried it. I use the Hornady 150 FMJBT and put it over 43.0 gr of IMR-4895. Chrono's 2650 from my M14.

^^^^ this is a load I would use on my Super Match . I don't know about using it with an AR10

 

[badboybeeson]

so far 168gr amax 43gr varget 50m all rounds touching about 1/2-3/4 inch
100 m about 1.5-2 inch, that said it was very colt and only have a 4 power scope and no bipod.

 

[supernova]

41.5 grs IMR4895 shoots very well in every .308 I've used it in. Mostly with 168 Hornady bthp but 155 AMAX and 180 sp hunting pills all shot nice tight groups with that load in 2 M14s, a Howa 1500 and a 700P.