PGW Timberwolf load data for 300 gr Berger Hybrids any good recipes!!

D

DG Photography

CGN frequent flyer
Rating - 100%
157   0   0
PGW Timberwolf .338 LM load data for 300 gr OTM Tactical Berger Hybrids any good recipes!!



Like the title says much appreciated! Please include as much detail as possible Thanks!
 
I have been doing well in the 103-106+gn range US869 in a Lapua case, 215M, low ES's. The usual caveats apply, though the PGW should be able to achieve CIP pressure levels without issue. Unlike the Rem/Sav crowd who'll be re-gluing bolt handles.

COL 3.990" (yeah, mines a single) approaches 2900fps nodes (long tube 32") usually achievable with the 338Edge.

The complaint... US869 is dirty.

Tsavo
 
tsavo said:
I have been doing well in the 103-106+gn range US869 in a Lapua case, 215M, low ES's. The usual caveats apply, though the PGW should be able to achieve CIP pressure levels without issue. Unlike the Rem/Sav crowd who'll be re-gluing bolt handles.

COL 3.990" (yeah, mines a single) approaches 2900fps nodes (long tube 32") usually achievable with the 338Edge.

Is this the single shot PGW built for you and you shot it out to 2 km?
Is this Terry ? If so I was trying to get ahold of you as we are making
A run 830 gr solids for the .50 BMG thanks for the info

The complaint... US869 is d
tsavo said:
I have been doing well in the 103-106+gn range US869 in a Lapua case, 215M, low ES's. The usual caveats apply, though the PGW should be able to achieve CIP pressure levels without issue. Unlike the Rem/Sav crowd who'll be re-gluing bolt handles.

COL 3.990" (yeah, mines a single) approaches 2900fps nodes (long tube 32") usually achievable with the 338Edge.

Is this the single shot PGW built for you and you shot it out to 2 km?
Is this Terry ? If so I was trying to get ahold of you as we are making
A run 830 gr solids for the .50 BMG thanks l
Click to expand...
Click to expand...
 
DG Photography said:
PGW Timberwolf .338 LM load data for 300 gr OTM Tactical Berger Hybrids any good recipes!!



Like the title says much appreciated! Please include as much detail as possible Thanks!
Click to expand...

Not to sidetrack the thread, but is there a "go to" load that can be developed in the Timberwolf. I have a buddy who is having a heck of a time trying to get his to group well. We have ruled out shooter issue by passing the gun around and using other rifles as a control.
 
arcticcathonda said:
Not to sidetrack the thread, but is there a "go to" load that can be developed in the Timberwolf. I have a buddy who is having a heck of a time trying to get his to group well. We have ruled out shooter issue by passing the gun around and using other rifles as a control.
Click to expand...

You could try 250 gr Scenars over 92gr -92.5 gr H-1000. In all the T-Wolfs I have
tried this load 92.5 gr worked best tested at 300m 8 shot group was .447" MOA with
.225" MOA of vertical.
 
Last edited:
I'm using 88.0 gr Retumbo with the 300 gr Berger Hybrids. The best I can do is a 2" five shot group at 300 yards. Not great but I'm working on it. Too much of a "Nervous Spaz". I've clocked this load at 2560 fps average. Haven't been able to get anywhere near the 2900 fps other people claim with their loads. Anyone tried Vithi vori powder with 300 gr Bergers?
 
arcticcathonda said:
Not to sidetrack the thread, but is there a "go to" load that can be developed in the Timberwolf. I have a buddy who is having a heck of a time trying to get his to group well. We have ruled out shooter issue by passing the gun around and using other rifles as a control.
Click to expand...

Please have your friend contact me at rs@pgwdti.com so we can diagnose and remedy any issue he may have...
Txs..
 
You must log in or register to reply here.
Back
Top Bottom