Picatinny rail on Canuck Defender-Regulator

[ThisIsMyBoomstick]

Morning,

My wife has a Canuck Defender-Regulator. At first I thought she wanted it for the name but its a fabulous little shotgun. She wants a reflex sight for it, but it only has a relatively narrow dovetail on the receiver. Is there such thing as a dovetail to Picatinny rail adapter with a side clamp that you could locktite into place to prevent it from vibrating off?

Thank you.

 

[Grain]

If you measure the dovetail width, there will very likely be a rail that fits. Quite possibly one from a CZ rimfire. They come with set screws to keep them solid.

 

[roadglide1]

Check that 2 day delivery online place for a dovetail to picatinny adapter… 11-22mm

 

[ThisIsMyBoomstick]

If you measure the dovetail width, there will very likely be a rail that fits. Quite possibly one from a CZ rimfire. They come with set screws to keep them solid.

Mr. Vernier says major width: 0.488", minor ~0.400"

Thank you.

 

[ThisIsMyBoomstick]

Check that 2 day delivery online place for a dovetail to picatinny adapter… 11-22mm

Merci. Do you know if they use the major or minor width?

 

[roadglide1]

The adapter is adjustable to fit dovetail widths… 11-22mm. I used one when I had a Canuck 12 gauge.

 

[ThisIsMyBoomstick]

The adapter is adjustable to fit dovetail widths… 11-22mm. I used one when I had a Canuck 12 gauge.

Thanks from my wife and me.

 

[roadglide1]

Thanks from my wife and me.

 

[brybenn]

I have a side saddle for mine. Someone could make one that has a rail on top now like they do for monsters? Worth a look. I paid about $100 for the side saddle precovid

 

[brybenn]

Airgun source sells dovetail to weaver/Pic mounts. They're adjustable ones as well

 

[ThisIsMyBoomstick]

Airgun source sells dovetail to weaver/Pic mounts. They're adjustable ones as well

Thank you. I found what you were referencing.